Plastic-base snap mousetrapInvestor packet · Nov 12, 2026

Page 1

Investment summary

The numbers do not close yet. At $0.45 a trap, each one clears $0.05 over its $0.40 cost to make; the $107,000 of tooling would take 2,140,000 traps to pay back, against a plan of 100,000. This round does not pay for production molds. It pays for the step that shows whether the numbers can close: Real mold quotes, traps tested in barns, and written feedback from three distributors. By the end of February 2027 the numbers either close, or the project stops before anyone pays for production molds.

A snap trap that empties clean and keeps fingers out of the bail

$12,000
The ask
To be set
Offered as
$374
Owner's money in
plus $10,000 committed
$0.05
Clears per trap
11% of the price

What the money does

UseAmountBasis
Prototype aluminum tool for the base (first 2000 parts)$9,000Illustrative; to be quoted (business risk B2)
200 field-test traps and buyer samples$1,500Illustrative
Patent search and provisional application preparation$1,500Illustrative
Total$12,000

What it reaches

Real mold quotes, traps tested in barns, and written feedback from three distributors. By the end of February 2027 the numbers either close, or the project stops before anyone pays for production molds.

Who is asking

Illustrative: in the inventor's own words, why they are the one to build this. So far: two rounds of printed prototypes, a store visit, a barn test and a distributor call (the correspondence log).

Plastic-base snap mousetrapInvestor packet · Nov 12, 2026

Page 2

The product and the evidence

Who it's for

Barns, garages and homes; sold through hardware and farm-supply stores

Why it sells

What people use now

AlternativeWhere this one is different
Classic wooden snap trapSplits, soaks up mess and is hard to clean; it can catch a finger. This one rinses clean and sets from the side.
Enclosed and electronic trapsCost more per trap. This one sells against the wooden trap on price (to check on the farm-supply shelf).

What people have said and done so far

DateWhoSaidDid or would payStrength
Oct 14, 2026Owner of a local farm-supply storeBarn customers buy traps four at a time; would carry it if the distributor has itWould stock one case to trymedium
Oct 15, 2026Two neighbors with barnsLiked that it rinses clean; one asked where to buy itOne offered $5 for a 4-packweak
Oct 16, 2026Hardware distributor rep (phone)Needs a landed cost under $0.45 and a UPC; wants a sampleAsked for samples and a price sheetmedium

How big it could be

Not estimated yet. A market size goes here only with its source.

Plastic-base snap mousetrapInvestor packet · Nov 12, 2026

Page 3

The numbers

Basis
Price to the distributor$0.45their landed-cost target
Cost to make one trap$0.40Cost sheet: material plus process, all parts
Clears per trap$0.0511% of the price
Tooling (molds)$107,000Cost sheet; placeholders until the quotes arrive
Plan volume100,000 traps50,000 a year for 2 years
Units to pay back the tooling2,140,000 traps

What would change it

Every figure is computed from the cost sheet and the funding sheet; none is typed in. Values marked illustrative are not quotes.

Plastic-base snap mousetrapInvestor packet · Nov 12, 2026

Page 4

The plan and the risks

Milestones

ByMilestoneBasis
Oct 22, 2026Spring supplier confirmed
Oct 29, 2026Base mold quote in hand
Nov 30, 2026Buyer feedback from 3 distributorsIntake: no buyer has seen it yet.
Dec 15, 2026Design frozen (risk actions in the CAD)
Jan 15, 2027Molds orderedOnly after the numbers close.
Mar 15, 2027First articles approved
Apr 30, 2027First shipment to a distributor

What could go wrong, and what is being done

RiskLevelWhat is being done
B1The numbers do not close: at $0.45 a trap clears about $0.05 over piece costhighGet real mold quotes (A-001), including a 2-cavity family mold; ask 3 distributors what they would pay; find the price, volume or tooling that closes it before ordering molds.
B2Tooling quote far above the 3-month budget ($107000 placeholder vs $8000-$12000)highFund tooling only after B1 closes; ask toolmakers about aluminum or prototype tooling for the first 10000.
B3Demand unproven: no buyer has seen ithighShow CAD renders and a 3D-printed sample to 3 hardware or farm-supply buyers; record what each says and would pay.
B5No company and no liability insurance yetmediumThe Office Manager Bot works through forming a company and getting insurance quotes.
B4Injury while setting the trap (finger in the bail)mediumFinger guard and set-from-the-side mark molded in (design risk F11); warning label; product liability insurance before the first sale.
B6Patent position unknownmediumSearch for similar traps; decide with a patent attorney before showing it publicly.
B8Nylon swells in damp barns and parts stop fittingmediumAccepted as designed (design risk F2); include in field testing.
B7Single supplier for the classic springmediumConfirm stock (A-002); identify a second music-wire spring maker.
Plastic-base snap mousetrapInvestor packet · Nov 12, 2026

Page 5

The terms, and what to know

What is offered

Not decided yet. Two options, both written up with an attorney before any money changes hands: a family loan in writing (a promissory note with interest and repayment dates), or a share of the company once the LLC is formed.

Amount$12,000 (illustrative)
FormA family loan or a share of the company, decided with an attorney
What it may be spent onOnly the uses on page 1. No production molds until the numbers close.
ReportingA one-page update each month, from the business record

How an investor gets money back

Honestly: a loan is repaid from sales on the dates written in the note, if there are sales. A share pays only if the company makes a profit it pays out, or is sold, or licenses the design. If the numbers do not close by February 2027, the project stops, and most of this money will have been spent finding that out.

Before anyone invests

The company

Status
Legal nameNot formed yetnot yet
EntityPlanned: single-owner LLCnot yet
Product liability insuranceQuotes requestedin progress
Rules that applyTo check: EPA rules for pest-control devicesin progress
Years in business0ready
OwnerThe inventor: product idea, CAD and prototypes so farready
Plastic-base snap mousetrapInvestor packet · Nov 12, 2026

Last page

Prep sheet

For the inventor only. Not handed over. A family member and a friend who have offered to put money in, Nov 12, 2026.

Owner's money already in: $374 spent, $10,000 committed. Investors ask this first.

The goal

Decide together whether to take family money for the next step, and on what terms, with no surprises for anyone

What we ask for

Walk-away

No money changes hands until the terms are in writing and an attorney has reviewed them. No more than $12,000 at this stage. Nothing for production molds until the numbers close.

What they will likely ask

QuestionAnswer
What do I get for my money?Set with an attorney before any money changes hands: a written loan with repayment dates, or a share once the company exists.
What happens if it fails?The money goes to quotes and tests. Production molds are not bought unless the numbers close, so the loss stops at this round.
How much of your own money is in?What the spending register shows, plus $10,000 committed for the next three months.
When do I get paid back?Only from sales. The first shipment is planned for April 2027, if the numbers close.
Why not a bank?A bank lends against sales, and there are none yet. The lender packet shows the numbers.

Still open (say so if asked)

TodayNote
Legal nameNot formed yetForming a single-owner LLC is with the Office Manager Bot (business risk B5).
EntityPlanned: single-owner LLC
Tax ID (EIN)Not yetNeeded for a W-9 and a business bank account. Free from the IRS once the LLC exists.
W-9 for vendor setupAfter the tax ID
Business bank accountNot yet
Product liability insuranceQuotes requestedBuyers often ask for a certificate of $1 million or more naming them. Illustrative.
UPC / GTIN barcodesNot yetLicense from GS1 before packaging is printed. Illustrative.
Rules that applyTo check: EPA rules for pest-control devicesA mechanical trap is a pest-control device; check EPA labeling and establishment rules before the first shipment. Illustrative.

Leave behind

Pages 1 to 5. Not this prep sheet.

After the meeting

Record what was said in this folder; add any signal to market-evidence.csv; update contacts.csv with the next step and date; put every promise on the action log (sop-meeting-prep.txt step 8).