Plastic-base snap mousetrapFunding packet · October 17, 2026

Page 1

Executive summary

Not ready to request funds: the numbers do not close yet. At $0.45 to the distributor, each trap clears $0.05 over its $0.40 piece cost. The $107,000 of tooling would take 2,140,000 traps to pay back, about 43 years at 50,000 a year. This packet shows what has to change, and the work already under way to change it.

The product

A snap mousetrap with a plastic base that is easier to empty and less likely to snap fingers. Wood splits and is hard to clean. The classic trap can catch a finger. This base molds a bait cup and a finger guard.

$0.40
Piece cost, one trap
$0.45
Price to the distributor
their landed-cost target
$0.05
Clears per trap
11% of price
$107,000
One-time tooling
2 of 2 tooling figures are placeholders, not quotes

Where it stands

Working CAD. No tooling yet. Target: 50,000 traps a year to hardware and farm-supply distributors. The owner is putting in $10,000.

What it would take to close

Top risks

RiskLevelWhat is being done
The numbers do not close: at $0.45 a trap clears about $0.05 over piece costHighGet real mold quotes (A-001), including a 2-cavity family mold; ask 3 distributors what they would pay; find the price, volume or tooling that closes it before ordering molds.
Tooling quote far above the 3-month budget ($107000 placeholder vs $8000-$12000)HighFund tooling only after B1 closes; ask toolmakers about aluminum or prototype tooling for the first 10000.
Demand unproven: no buyer has seen itHighShow CAD renders and a 3D-printed sample to 3 hardware or farm-supply buyers; record what each says and would pay.

Funding request

$115,000 in startup costs, less $10,000 from the owner: $105,000. Not requested until the numbers close; shown so a lender or advisor can see the size of it.

Plastic-base snap mousetrapFunding packet · October 17, 2026

Page 2

Product and market

The problem it solvesWood splits and is hard to clean. The classic trap can catch a finger. This base molds a bait cup and a finger guard.
Who buys and uses itHardware stores and farm supply, then the person at home.
Where it is usedHome, garage, and barn.
What it competes withThe classic wood snap trap with a wire bail and a music-wire spring.
What buyers have saidNot known yet.
Sales goalSell it. 50,000 a year to hardware distributors. Landed cost they want is under $0.45.

Rules and standards it runs into

From the screening questions, these are the ones that apply:

No electrical, medical, wireless, food-contact or children's-product rules apply.

Decisions already made

DateDecisionWhy
Oct 12, 2026Plastic base instead of woodWood splits and is hard to clean.
Oct 13, 2026Nylon 6/6 for the base and the trigger plateBetter impact and moisture resistance than polypropylene for barn use.
Oct 14, 2026Amortize tooling over 2 years and 100,000 traps50,000 a year for 2 years is 100,000.
Oct 15, 2026Keep the classic wire bail, spring, and steel stapleExisting suppliers already make this bail.
Oct 15, 2026Approve the project charter, revision AFact-finding is done: the charter sets the scope, the $0.45 landed-cost target, the milestones and the $8,000-$12,000 budget through design freeze.
Plastic-base snap mousetrapFunding packet · October 17, 2026

Page 3

Cost and unit economics

Bill of materials, one unit

PartWhat it isMaterialProcessEachTooling (once)
Plastic baseNylon 6/6 base with the bait cup, finger guard and spring post molded in. Wall 1.8 mm, draft 1 degree.$0.11$0.06$0.17$85,000
Trigger plateNylon 6/6 pedal with the bait spike molded on. Its own small mold.$0.03$0.02$0.05$22,000
Wire bailMusic wire kill bar, the classic shape. Purchased.$0.04$0.01$0.05–
SpringMusic wire torsion spring, classic size. Purchased.$0.03$0.01$0.04–
StapleSteel staple that holds the spring to the base. Pressed in at assembly.$0.01$0.00$0.01–
AssemblyHand assembly, 12 seconds, staple pressed in.$0.00$0.03$0.03–
PackagingCard and blister for one trap.$0.04$0.01$0.05–
One unit$0.26$0.14$0.40$107,000

Tooling is a one-time cost, kept out of the piece cost so it can be seen. 2 of 2 tooling figures are placeholders, not quotes.

What one trap earns

$0.45
Price to the distributor
$0.40
Piece cost
$0.05
Clears per trap
11% gross margin
2,140,000
Traps to pay back tooling

Tooling spread over different volumes

Traps madeTooling per trapFull cost per trapLeft per trap at $0.45
100,000$1.07$1.47−$1.02
200,000$0.54$0.94−$0.48
500,000$0.21$0.61−$0.16
2,140,000$0.05$0.45$0.00

The last row is the break-even volume. A negative number means each trap loses money at that volume once the tooling is counted.

Plastic-base snap mousetrapFunding packet · October 17, 2026

Page 4

Funding request and milestones

Use of funds

AmountBasis
Base mold (1-cavity hot runner)$85,000Placeholder until quote A-001.
Trigger plate mold$22,000Placeholder. Not a quote.
First production run (10000 packed traps at piece cost)i$4,00010000 x 0.40
Samples and field testingi$2,500To be quoted.
Packaging artwork and UPC codesi$1,500To be quoted.
Total startup cost$115,000
Owner's contribution– $10,000Midpoint of $8,000 to $12,000 for the next 3 months.
Amount to finance$105,000Loan, grant or partner

Milestones

ByMilestoneSource
Oct 22, 2026Spring supplier confirmedaction A-002
Oct 29, 2026Base mold quote in handaction A-001
Nov 30, 2026Buyer feedback from 3 distributorsiillustrative
Dec 15, 2026Design frozen (risk actions in the CAD)iillustrative
Jan 15, 2027Molds orderediillustrative
Mar 15, 2027First articles approvediillustrative
Apr 30, 2027First shipment to a distributoriillustrative

Open actions with an owner and a date

ActionWhoDueStatus
Get a quote for a 1-cavity nylon base mold, hot runner, gate at the rear, draft 1 degree, wall 1.8 mm, with a short rib at the spring seat, the set-from-the-side mark, the finger guard, the bait spike, and radiused pivot holes.YouOct 29, 2026open
Confirm the music-wire spring supplier still stocks the classic size that matches the wire bail.YouOct 22, 2026waiting

11 design changes from the risk analysis still need an owner and a date (appendix A).

Plastic-base snap mousetrapFunding packet · October 17, 2026

Page 5

Risk register

Likelihood ↑ · Impact →
5
B2
B1
4
B3
3
B6 B8
B5
2
B7
B4
1
1
2
3
4
5

How to read it. Each risk is scored 1–5 for likelihood and 1–5 for impact. Their product rates it: 15 and up is High, 8–14 Medium, under 8 Low.

High risks are worked before money is committed. Product safety risks are worked by severity first, whatever their score (appendix A).

RiskTypeL×ILevelResponseOwnerBy
B1The numbers do not close: at $0.45 a trap clears about $0.05 over piece costFinancial5×5HighGet real mold quotes (A-001), including a 2-cavity family mold; ask 3 distributors what they would pay; find the price, volume or tooling that closes it before ordering molds.InventorNov 30, 2026
B2Tooling quote far above the 3-month budget ($107000 placeholder vs $8000-$12000)Financial5×4HighFund tooling only after B1 closes; ask toolmakers about aluminum or prototype tooling for the first 10000.InventorOct 29, 2026
B3Demand unproven: no buyer has seen itMarket4×5HighShow CAD renders and a 3D-printed sample to 3 hardware or farm-supply buyers; record what each says and would pay.InventorNov 30, 2026
B5No company and no liability insurance yetLegal3×4MediumThe Office Manager Bot works through forming a company and getting insurance quotes.Office Manager BotDec 31, 2026
B4Injury while setting the trap (finger in the bail)Product liability2×5MediumFinger guard and set-from-the-side mark molded in (design risk F11); warning label; product liability insurance before the first sale.InventorMar 15, 2027
B6Patent position unknownLegal3×3MediumSearch for similar traps; decide with a patent attorney before showing it publicly.Office Manager BotNov 30, 2026
B8Nylon swells in damp barns and parts stop fittingProduct3×3MediumAccepted as designed (design risk F2); include in field testing.InventorFeb 28, 2027
B7Single supplier for the classic springSupply2×4MediumConfirm stock (A-002); identify a second music-wire spring maker.InventorOct 22, 2026
Plastic-base snap mousetrapFunding packet · October 17, 2026

Page 6

Appendix A: design risk analysis

Every way the trap could fail, scored before and after the design changes. S = severity, O = occurrence, D = detection, each 1–10; their product is the risk priority number (RPN). Total risk fell from 1142 to 465. Severity 9–10 items get action whatever their RPN.

FailureBefore (S·O·D)Design changeAfterStatus
F2Nylon swells in the barn5·3·8 = 120None: accepted as designed5·3·8 = 120accepted
F1Base cracks at the spring seat8·4·5 = 160Add a short rib at the spring seat; Use an engineered resin6·3·5 = 90accepted
F4Trigger fires with no mouse4·4·7 = 112Increase trip force by 10 percent4·2·6 = 48accepted
F3Base cracks when dropped on concrete4·5·6 = 120Thicken the landing edge3·3·5 = 45accepted
F11A finger stays in the path of the bail while setting Severity 99·3·5 = 135Mold a set-from-the-side mark; Mold a finger guard beside the bail5·2·3 = 30accepted
F5Spring takes a set6·3·4 = 72Specify stress-relieved music wire4·2·3 = 24accepted
F10Bail sticks6·3·4 = 72Polish the bail contact4·2·3 = 24accepted
F12Base warps and the bail binds6·3·4 = 72Cool the base in the fixture before it is released4·2·3 = 24below threshold
F6Staple pulls out of the nylon5·3·3 = 45Barb the staple leg3·2·2 = 12below threshold
F15Trigger plate flashes and the pedal sticks5·3·4 = 60Add the pedal pivot to the trim check3·2·2 = 12below threshold
F7Pedal pin walks out5·3·3 = 45Head both ends of the pin2·2·2 = 8below threshold
F8Warning label comes off the nylon3·3·3 = 27Use a label adhesive made for nylon2·2·2 = 8below threshold
F13Bait will not stay on the pedal4·4·3 = 48Mold a bait spike on the pedal2·2·2 = 8below threshold
F14Kill bar wears a groove in the pivot4·3·3 = 36Radius the pivot holes2·2·2 = 8below threshold
F9Blister cracks in the store3·3·2 = 18Thicken the blister2·2·1 = 4below threshold

i marks an illustrative figure, to be replaced before this is shown. Every other figure comes from the project's own sheets. 2 of 2 tooling figures are placeholders, not quotes. Prepared with the A.N. Creation Office.