A.N. Creation Office ยท Project recordPlastic-base snap mousetrap. Example (illustrative figures are marked).

Action log

IDOpenedActionWhoDueStatus
A-0012026-10-15Get a quote for a 1-cavity nylon base mold, hot runner, gate at the rear, draft 1 degree, wall 1.8 mm, with a short rib at the spring seat, the set-from-the-side mark, the finger guard, the bait spike, and radiused pivot holes.You2026-10-29open
A-0022026-10-15Confirm the music-wire spring supplier still stocks the classic size that matches the wire bail.You2026-10-22waiting
A-0032026-10-17Specify the engineered resin for the base and the trigger plate.open
A-0042026-10-17Thicken the landing edge of the base.open
A-0052026-10-17Increase the trigger trip force by 10 percent.open
A-0062026-10-17Specify stress-relieved music wire for the spring.open
A-0072026-10-17Barb the staple leg so it stays in the nylon.open
A-0082026-10-17Head both ends of the pedal pin.open
A-0092026-10-17Use a label adhesive made for nylon.open
A-0102026-10-17Thicken the blister.open
A-0112026-10-17Polish the bail contact where it meets the latch.open
A-0122026-10-17Cool the base in the fixture before it is released.open
A-0132026-10-17Add the pedal pivot to the trim check.open
S-0012026-10-14Add a glow-in-the-dark bait cupsuggestion
S-0022026-10-10Make the base stackable for shippingsuggestion

Readable copy built by record-view.py from the sheet of the same name. The sheet is the record.