A.N. Creation Office ยท Project recordPlastic-base snap mousetrap. Example (illustrative figures are marked).

Project charter

Revision: A, 2026-10-15, approved by the inventor (decision log 2026-10-15). Change pending: ECN-001.

1. PRODUCT

A snap mousetrap with a molded nylon base that is easier to empty and less likely to snap fingers. Wood splits, is hard to clean, and the classic trap can catch a finger.

2. OBJECTIVE

This project delivers: a molded, tested trap, packed on a card, ready for first orders from hardware and farm-supply distributors.

Left for later: a stackable base, a glow-in-the-dark bait cup (suggestions S-001, S-002), retail packaging for big-box stores.

3. SCOPE

In: base and trigger plate design and molds; the classic wire bail, spring and staple (bought); hand assembly; card and blister pack; a field test in barns; first-article approval.

Out: a new spring or bail shape (decision 2026-10-15); automated assembly; selling direct to consumers.

4. SUCCESS CRITERIA

- Landed cost per packed trap at or under $0.45 at 50,000 a year (the distributor's target). Today: $0.40 to make plus $1.07 of tooling = $1.47. Not met (risk B1).

- Sets without a finger in the bail's path (risk F11).

- Survives a damp barn for a season without swelling out of fit (risk F2), shown in the field test.

- First order from a distributor by 2027-04-30.

5. DELIVERABLES BY STAGE

- S0 Fact-finding: project description, this charter, first cost sheet and risk table. Done.

- S1 Design: CAD with the risk actions in it; quote package for the base mold.

- S2 Prototype: 3D-printed sets for the buyer and barn tests.

- S3 Tooling: base and trigger molds, after the numbers close.

- S4 Qualification: first articles, the field test report.

- S5 Launch: first distributor order.

6. MILESTONES

- 2026-10-22 Spring supplier confirmed (A-002)

- 2026-10-29 Base mold quote in hand (A-001)

- 2026-11-30 Buyer feedback from 3 distributors (illustrative)

- 2026-12-15 Design frozen (illustrative)

- 2027-01-15 Molds ordered, only if the numbers close (illustrative)

- 2027-03-15 First articles approved (illustrative)

- 2027-04-30 First shipment (illustrative)

7. BUDGET

Through the next gate (design frozen): $8,000 to $12,000 for quotes, samples and tests, the owner's own money.

Total to launch: about $115,000 (illustrative), most of it the two molds ($107,000, placeholders until quoted). Not funded. See ECN-001.

Tracked in the spending register.

8. ASSUMPTIONS AND CONSTRAINTS

- 50,000 traps a year for 2 years; nylon 6/6; the classic bail and spring.

- The owner's money only, until the numbers close. One person doing the work.

9. TOP RISKS

- B1 The numbers do not close at $0.45 (business risk register): real mold quotes and buyer prices first.

- F11 A finger in the bail's path (risk table): finger guard and set-from-the-side mark molded in.

- F2 Nylon swells in a damp barn: accepted as designed; field test.

10. DECISION-MAKER AND APPROVALS

The inventor decides everything. A distributor's approval is needed only for its own packaging and labeling rules.

11. REVISIONS

A 2026-10-15 first issue.

Readable copy built by record-view.py from the sheet of the same name. The sheet is the record.