Procedure: Machine safety (b-machine-safety). Revision 4 — October 18, 2026. Section 5 rewritten with Mike. Index: https://ancreationoffice.com/sop.txt Source: Mike's practice running molding plants (Mike's notes, kept private). Lines marked "Mike" are his; "office" lines are the office's own position. Tier: managed: the office organizes and prepares; a qualified safety professional decides machine safeguarding. Read this when a plant adds or moves a press, robot or auxiliary; when someone gets hurt or nearly hurt; when people are found working around a guard; or when a safety fix is being weighed against its cost. 1. LIVE IT (Mike) - Safety comes first and is lived every day. No part is worth a father or mother not coming home, or someone losing a hand. - People who cheat on safety cheat on everything else about the product too. A business that doesn't take care of its people won't be a successful business. - People take shortcuts because they want to do well. Sit them down and listen. Then say it plainly: "I don't want to tell your wife you died. If the right way takes 30 seconds longer, do it the right way." 2. THE LINE: SAFE FOR EVERYONE, NOT JUST FOR YOU (Mike) - The question is not "can you do it safely?" It is "can every person who does this job do it this way safely?" If not, nobody does it that way. - A skilled person working around a rule teaches everyone watching that this is how you get ahead. The next person copies it and gets hurt. - So enforce the rule on everyone, including the best people in the plant, and say it isn't personal: if someone gets hurt following a shortcut you allowed, that is on you. - When people are working around a rule because there is a real problem, go and look at what doing it right takes, and fix it. Mike has never met a safety problem without a solution; some took a month or two. 3. THE STANDARDS FOR THE EQUIPMENT (Mike: get them and live by them; office: the list) - Injection molding machines: ANSI/PLASTICS B151.1-2017 (horizontal and vertical machines; a revision may be in progress) (library: ansi-b151-1). - Guarding and lockout, US workplace law: OSHA 29 CFR 1910.212 (machine guarding) and 1910.147 (lockout/tagout) (library: osha-1910-212, osha-1910-147). - Risk assessment and safeguarding method: ISO 12100, ANSI B11.0, ANSI B11.19; safety-related controls: ISO 13849-1 (library). - Robots and automation cells: ANSI/A3 R15.06-2025 and ISO 10218-1/-2:2025 (library: ansi-r15-06, iso-10218). - Electrical work on machines: NFPA 79, NFPA 70E (library). - Office: a qualified safety professional or integrator confirms the safeguarding for each machine; the office prepares the checklist, the photos and the gaps. 4. OSHA AS A PARTNER (Mike) - When the plant really lives its safety program, invite OSHA in for walk-around audits. Mike found they become very much on your side once they see it. If the rule is "don't let OSHA in without me at the door," the plant is still in a fight with them. - Office: OSHA runs a free On-Site Consultation Program for small and medium businesses, separate from enforcement, which is one way to start that relationship. 5. WHEN THE MONEY ISN'T THERE: REPORT IT UP, EVERY TIME - It happens (Mike): management won't pay to upgrade a machine, and may decide a fine costs less than the fix. That is management's decision to make. - It never changes your job (Mike): report every hazard up the chain of command, every time. Never skip a report because "I already know they won't fix it"; that is not your decision. Report it fully and honestly, and make sure it is recorded that you reported it. If your superiors choose not to act, that is on them; you have done your job. - How Mike puts it to the manager: what is good there, what the hazard is, and "I'll live by your decision, but I need to make sure you have all the information." - Keep doing everything you personally can to make it safe with the resources there are (Mike). - Never falsify a safety check or record, and never help hide a hazard (Mike and the office). - Write down every gap: what the standard asks, what is in place, what the fix costs, who was told, when, and what they decided (office: this is the record of the report). - A hazard that could kill or seriously injure someone right now is not a cost trade-off: stop that work until it is guarded, and take it straight to the top (office). - The duty in the job is to report up the chain; reporting outside the company is not part of the job (Mike). It does remain every worker's legal right to report hazards to OSHA, with protection from retaliation (OSH Act section 11(c)), and the office never advises anyone against it (office). - For an inventor's own product, product safety is not weighed against fines at all (sop-quality.txt; product safety and listing). This section is about plant equipment. WHAT THE REVIEW PRODUCES A machine safety review per machine or cell, in its own dated folder: the standards that apply, a checklist against them, photos, what is missing, the proposed fix and its cost, who decided and when, and the behavior issues found (shortcuts, guards defeated) with how they were handled. HANDS OFF Safety professional or engineer (safeguarding decisions), robot or automation integrator (cells), electrician (electrical work), OSHA On-Site Consultation (optional, by the plant's choice).