Useful purpose, understandable operation, physical fit and lasting quality. A practical design lens for your idea, with sources and a review worksheet.
Start with the question your design needs to answer. These prompts support the conversation; you do not need to complete every row to begin.
Complete guide for assistants · Download the design-review worksheet
Keep going: risk reviews lead to action
Keep going (the procedures call it Advance Now) means take a useful step today. Treat risk analysis as a source of questions, opportunities and routes through the problem. Ordinary uncertainty, imperfect ergonomics, limited funds, unanswered checklist items or a long list of possible failures do not automatically stop the project. Preserve momentum. Help the inventor find the next useful action, carry it out with the tools and authority available, and keep the concern visible.
Keep a short list of unresolved concerns, possible routes, questions for the right person and work that advances now. Reuse existing risk and issue IDs. Hold only an affected activity when a concrete limit applies; continue other useful work. Carry the questions into supplier, professional and customer conversations.
Read the shared principle · Instructions for assistants · Roadblock and opportunity list
A design lens, used when it helps
These principles add the human side to the product-development process. The design role uses them when comparing concepts and shaping the experience; the engineering role connects them to requirements, interfaces and risks; the prototype role gathers prototype evidence; your Project Manager Bot coordinates the next useful step. Keep the reasoning in the background and explain what matters to this idea. A person can start with a rough description without completing a design questionnaire.
Design reviews begin while customer needs become concepts and engineering requirements. They continue through refinement, prototype trials and production decisions. Use-error findings feed the risk analysis, including design FMEA where appropriate; foreseeable misuse and combined hazards may need additional analysis. Link existing need, requirement, risk and test IDs rather than creating an isolated scoring exercise.
Established design foundations
Rams's principles ask whether a design earns its place in someone's life: useful purpose, coherent appearance, understandable operation, restrained complexity, honest presentation, lasting quality, care in the details and attention to environmental effects. Innovation should improve the product rather than merely make it different. These are thoughtful review prompts, not universal formulas or a test certificate.
Norman's interaction ideas help separate what a person can do from the cues that tell them where and how to do it. A signifier communicates an action; an affordance concerns an action that is possible. Review how controls relate to results, how the person knows what happened, and whether they can form a useful understanding of operation. A cue that seems obvious to the designer may still confuse the user.
NC State's universal-design framework considers equitable access, flexible ways to use a product, simple operation, information people can perceive, tolerance of mistakes, manageable effort and enough space to approach and operate it. Use these lenses with intended users and task evidence; the presence of a feature does not establish accessibility for everyone.
Industrial design brings form, function, making and the user's experience together. Research users, explore genuinely different concepts, refine with trials, choose with evidence, and coordinate models and drawings with engineering and suppliers. Return to earlier choices when learning changes them. IDSA provides a professional overview; the sequence here is an A.N. Creation working synthesis, not a mandatory textbook standard.
Human-centered methods from Design Kit can help organize interviews and prototype learning. Circular-design methods can help investigate repair, reuse, disassembly and material recovery. Record realistic options and tradeoffs, including available recovery systems; a recyclable material alone does not prove that the whole product will be recovered.
Read more: Vitsœ — Dieter Rams: good design · Don Norman — Interaction, signifiers and feedback · NC State — Principles of Universal Design · IDSA — What is industrial design? · IDEO.org — Design Kit · Ellen MacArthur Foundation — Circular Design Guide
Ergonomics and physical fit
Consider the complete task: grip, reach, clearance, posture, operating force, repetition, duration, fatigue, clothing, gloves, assistive devices and the use environment. NIOSH's occupational ergonomics guidance is useful background, particularly for workplace products and tools. It does not set one approved handle size or force for every invention.
State the intended population and the dimension being designed. Reach may be limited by smaller users, clearance by larger users, and an adjustable grip by several interacting dimensions. A person is not at the same percentile for every body measurement. Do not assume a 5th-to-95th-percentile target on one dimension accommodates 90% of users across a whole product.
ANSUR II provides military anthropometric background; it is not a representative general-public dataset. Check the population, measurement definitions, units, clothing assumptions, provenance and access terms before using data. Choose relevant evidence for the people who will actually use this product, then verify fit and effort through suitable prototype trials. Do not invent percentiles, dimensions or measurements.
Read more: NIOSH — Ergonomics overview · Penn State OPEN Design Lab — ANSUR II
Practical design review
Reuse the existing People, use and ergonomic design check sheet and project records. The prompts below are a companion, not a second mandatory gate. Review the areas relevant to the current decision; record not applicable with a reason and leave unknown facts open.
For each area, save the concept and exact revision, related need/requirement IDs, status, evidence and its limits, linked risk/test IDs, action, owner and review date. Distinguish a designer's judgment, a source-derived assumption and an observation from a user trial. Keep sketches and concept comparisons in product/concept/; linked requirements, risk reviews and test evidence stay in their assigned subject folders.
If a 1–5 rating helps compare alternatives, define the scale and priorities before scoring, include the supporting evidence, and leave unsupported ratings unresolved. A low rating can flag an action; a high average cannot cancel a serious hazard or failed requirement. Do not present a score below 3 as a universal engineering threshold.
A useful review request is: Compare the concepts against the relevant design areas. For each judgment, cite the actual evidence or mark it untested. Link gaps and use-error scenarios to the existing requirements, risk analysis and prototype/test plan. Identify the next small trial that would resolve an important uncertainty.
DP-01 — Usefulness
Which user need does each feature serve, and what can be simplified without losing required function?
DP-02 — Simplicity
Can parts, controls or steps be removed while preserving safety, service and accessibility?
DP-03 — Understandability
Can intended users recognize what to do from form, cues and a coherent explanation of operation?
DP-04 — Mapping and feedback
Do controls relate clearly to their effects, and do users perceive relevant changes or failure to act?
DP-05 — Constraints
Can foreseeable incorrect actions be prevented or detected before causing harm, without obstructing correct use?
DP-06 — Tolerance for error
What happens after an accidental action, and how can the person recover or reach a safe state?
DP-07 — Physical effort
Are force, posture, sustained holding, repetition and fatigue suitable for the actual task and users?
DP-08 — Fit and reach
Are grip, reach, clearance and adjustability justified for the intended population, including clothing and aids?
DP-09 — Perceptible information
Are essential cues usable with relevant sensory differences, lighting, noise and foreseeable distraction?
DP-10 — Users and environment
Are intended users, experience, tasks, training and use conditions stated rather than assumed?
DP-11 — Use-error scenarios
Which interface or task conditions could lead to harmful mistakes, and where are the risks and actions recorded?
DP-12 — Honesty
Do form, labeling and proposed claims match what the design and evidence actually support?
DP-13 — Durability
Will function, appearance and useful life hold up under expected wear, cleaning, maintenance and repair?
DP-14 — Lifecycle
Have materials, replaceable parts, disassembly, reuse and actual end-of-life routes been considered?
DP-15 — Detail
Are consequential dimensions, finishes, edge treatments and tolerances justified and coordinated with engineering?
DP-16 — Validation
Have representative users tried the relevant tasks on the specified revision, with observations and open issues recorded?
Download the design-review worksheet · Existing people and ergonomics check sheet
Build to learn, then validate the use
Use early sketches, mockups and prototypes to investigate a question before expensive refinement. Observe representative users performing real tasks; record confusion, mistakes, workarounds, effort and unsuccessful attempts as well as successful use. A prototype's missing functions or different materials can limit what the trial proves.
Define the intended users, conditions, tasks and acceptance criteria before a final validation. Record configuration, training, participants, methods, observations, deviations and results. Tie findings back to the requirements and use-related risks; redesign and repeat affected checks when necessary. Use safe, appropriate methods and qualified review for tasks with a material hazard.
IEC 62366-1 concerns safety-related usability engineering for medical devices. Its public catalog is not the full licensed procedure, and general inventions do not automatically fall under that standard. FDA's human-factors guidance has medical-device validation participant recommendations; a number such as 15 per distinct user population is not a universal testing rule or proof of adequate coverage. Select and justify the evaluation for the product, risk, users and applicable requirements.
Read more: IEC — IEC 62366-1 usability engineering · FDA — Applying Human Factors and Usability Engineering to Medical Devices
Sources and access
Original A.N. Creation synthesis based on Mike's design-principles outline. No paid standard, textbook chapter or third-party template was acquired or reproduced.
Read the relevant current source when applying it and save its URL, edition or revision where applicable, checked date and relevance with the project. Catalog scope and a resource listing do not mean the full standard or dataset was read. Keep design philosophy, occupational guidance, population data and regulated medical-device procedures distinct.
- Vitsœ — Dieter Rams: good designDesign philosophy prompts, not numerical acceptance criteria or proof of product performance.
- Don Norman — Interaction, signifiers and feedbackThe article discusses touch and gesture systems; adapt the interaction ideas to the actual physical product and test them.
- IDSA — What is industrial design?A profession/process overview, not a prescribed six-stage standard or validated engineering package.
- NC State — Principles of Universal DesignDesign guidance from the originating institution; it is not accessibility certification or proof that every user is accommodated.
- NIOSH — Ergonomics overviewOccupational guidance; adapt it to the intended users, product and exposure rather than assuming consumer-product clearance.
- Penn State OPEN Design Lab — ANSUR IIUS Army sample, not a representative civilian population. Read variable definitions, population and dataset terms; validate fit with intended users.
- IEC — IEC 62366-1 usability engineeringPublic catalog summary only; paid full standard not read or reproduced. Confirm applicable edition/amendments; do not impose medical-device compliance on unrelated products.
- FDA — Applying Human Factors and Usability Engineering to Medical DevicesMedical-device guidance. Its validation participant recommendations are context-specific, not a universal product-testing sample size.
- Ellen MacArthur Foundation — Circular Design GuideMethods to investigate; do not claim circularity, recyclability or sustainability without evidence for the product and its actual recovery route.
- IDEO.org — Design KitSelect methods for the current question. Workshop outputs and positive reactions are not proof of demand, safety or production readiness.
Product-development process · Design risk and quality planning · Test planning · Planning Resources
Shared rules for bot work are in the hotbotspot tool library.
Everything here is a starting point. Work with artificial intelligence always needs tuning, so test it and dial it in for your own work, data and model before you rely on it.