Places your assistants can go for standards, official guidance, and people or services. We point to the source that maintains the information.
The resources are as much for the bot as for you. They are a chosen set that represents each area well, so the bot can go to one good source and stay in line with how products are really developed, instead of hunting through a dozen versions of the same standard. You don't have to explain them to the bot. It reads and searches them on its own, and searches further only when a project needs something the library doesn't cover. You don't need to browse this to start: your bot finds the source that fits the question.
477 starting points across the office. Recheck the source when you use it. Instructions and list for bots · Structured list
Product development check sheets — ten working sheets your bot fills from the conversation, including a 25% factory-cost starting point for pricing and the Amazon, Walmart and Lowe’s entry routes. Download the editable worksheet.
Plan tests before the build — choose samples, define acceptance criteria, and lay out electrical/RF, drop and submersion tests. Includes a test-plan template, matrix and report.
Design risks and quality planning
Product, startup and project planning — compare established sources and use a planning review worksheet.
Keep going — use risks to find routes forward, keep questions ready, and take a useful step today.
The product-development process — the connected engineering approach from customer needs to tested design and production controls. Your Project Manager Bot uses it quietly and can explain it when you want to work formally.
Design for people — principles for usefulness, clear interaction, physical fit, inclusive use and lasting quality, with a design-review worksheet.
Before you register or pay
Make sure you are on the real government website.
Start on .gov for U.S. government services. Military agencies also use .mil. A government-looking logo, sponsored result or “official” business name is not proof. For other domains, follow a verified agency referral.
SAM registration and renewal are free. An EIN is free directly from the IRS. State filing fees may still apply; separate the government fee from an optional service fee.
How to check the address and avoid lookalikes
- Read the actual hostname, not the logo or the words in a page title. sam.gov.example.com is part of example.com, not sam.gov. HTTPS protects the connection; it does not prove government identity.
- Some real state portals and official partner programs use .us, .org, .edu or commercial domains. Reach them through the verified agency page or its directory and verify the referral. A non-.gov site is not automatically fraudulent or official.
- Before entering tax IDs, identity documents, bank details or payment information, verify the agency and exact task. Show the person the official starting URL, final destination and any government versus service fee. Do not rely on a threatening email to verify itself.
- For international projects, use that country’s official government directory; .gov and .mil here describe U.S. starting points.
Who can use .gov · Government domains outside .gov and .mil · GSA: SAM registration and renewal are free · IRS: get an EIN for free · FTC: business and government impersonation
How the assistants use this list
Each assistant’s working instructions point here. It selects sources relevant to the task, checks current information, and saves the source and date with its work. It should explain what applies to your project, rather than asking you to study the whole directory.
Some documents need purchase, permission, or a particular license, including permission for use with artificial intelligence. The assistant should link you to the source and tell you what access is needed. We do not keep copies of those standards here.
Find a source
Every source by shelf
Company and government
- SBA — Launch your business — An official roadmap for structure, location, business names, registration, tax IDs, licenses, bank accounts and insurance. (Company and government)
- SBA — Find your state registration office — Find the state or territory office responsible for business registration without starting from a search advertisement. (Company and government)
- USA.gov — State and territory governments — A trusted route to state government websites for taxes, licenses and local agency information. (Company and government)
- IRS — Get an EIN directly, for free — The official IRS starting point for an employer identification number (EIN). The IRS does not charge for an EIN. (Company and government)
- IRS — Starting a business and federal taxes — Federal tax starting points for new businesses, including structure, taxes, records and tax-year choices. (Company and government)
- IRS Publication 583 — Starting a business and keeping records — A starting reference for business records and bookkeeping responsibilities. (Company and government)
- FinCEN — Check current beneficial ownership rules — The agency’s current source for beneficial ownership information (BOI) reporting and exemptions. (Company and government)
- FTC — Scams targeting small businesses — Recognize fake invoices, government impersonation, misleading services and other scams aimed at businesses. (Company and government)
- NIST — Small Business Cybersecurity Corner — Practical cybersecurity starting points for a small company’s accounts, devices, data and suppliers. (Company and government)
- SCORE — Find a business mentor — Find volunteer mentors by expertise, industry and location to discuss business plans, marketing, operations or finance. (Company and government)
- SBA — Local business help and SBDCs — Find a nearby Small Business Development Center or other SBA partner for planning, operations, market research and finance guidance. (Company and government)
- SBA — Get business insurance — Plain explanation of business insurance types, including product liability, and how to buy it. (Company and government)
- Upcover — Insurance for hardware startups — Plain list of the cover a hardware business usually needs: general and product liability, errors and omissions, recall. (Company and government)
- Incoterms 2020 — 11 trade terms that split cost, risk and duties (delivery, carriage, export/import clearance, insurance) between seller and buyer. Rules paid; explanations free. (Company and government)
- Harmonized Tariff Schedule — US import tariff classifications and duty rates on the Harmonized System. Free. (Company and government)
- SBA — Open a business bank account — What a business bank account protects, what the bank asks for (EIN, formation papers, ownership documents), and merchant services. Free. (Company and government)
- FDIC BankFind — check a bank is FDIC-insured — Confirms a bank is a real, FDIC-insured bank before opening an account; fintech apps often hold money through a partner bank. Free. (Company and government)
- NCUA — find and check a credit union — Finds federally insured credit unions, many of which offer business accounts and small loans. Free. (Company and government)
- SBA — Apply for licenses and permits — Federal, state and local licenses and permits a business may need, and where to check. Free. (Company and government)
- IRS — Small Business and Self-Employed Tax Center — The IRS hub for small business taxes: self-employment tax, estimated taxes, deductions, employment taxes, forms and calendars. Free. (Company and government)
- IRS Publication 334 — Tax Guide for Small Business — The plain guide to income, expenses, deductions and records for sole proprietors and single-member LLCs. Free. (Company and government)
- IRS — Estimated taxes — “Individuals, including sole proprietors, partners, and S corporation shareholders, generally have to make estimated tax payments if they expect to owe tax of $1,000 or more when their return is filed”; corporations at $500. The due dates and how to pay. Free. (Company and government)
- SBA — Hire and manage employees — The steps before the first hire: employer registration, withholding, I-9, state new-hire reporting, unemployment tax, workers’ compensation. Free. (Company and government)
- USCIS — Form I-9 and E-Verify — Employment eligibility verification required for every employee hired in the US. Free. (Company and government)
- Dun & Bradstreet — get a D-U-N-S number (free) — A free business identifier some large customers, retailers and app stores ask for; the free route can take longer than paid “expedited” offers. (Company and government)
- Regional: Wisconsin One Stop Business Portal — Wisconsin’s single application to form an LLC or corporation (Department of Financial Institutions), register for state business taxes (Department of Revenue) and get an unemployment insurance assessment (Workforce Development). Free to use; state filing fees apply. (Company and government)
- Regional: Wisconsin Department of Financial Institutions — corporations — Wisconsin’s business registry: forming an LLC, name search, annual reports, registered agent changes. Fees apply. (Company and government)
- Regional: Wisconsin Department of Revenue — business tax registration — Seller’s permit, use tax and withholding registration for Wisconsin businesses (Form BTR-101, online at tap.revenue.wi.gov/btr); a small registration fee renews every two years. (Company and government)
- SBA — Veterans Business Outreach Centers — Free training, counseling and mentoring for veteran-owned businesses and military spouses. Free. (Company and government)
- SBA — Women’s Business Centers — Free and low-cost training and counseling, open to all entrepreneurs, with a focus on women. Free. (Company and government)
- Trade.gov — U.S. Commercial Service export help — Free and low-cost help to start exporting: market research, finding buyers, trade events, local export assistance centers. Free. (Company and government)
- IRS Publication 463 — Travel, gift and car expenses — The IRS's own guide to travel and car expenses and the records they need: the source for what the trip log and expense ledger must hold (sop-business-record.txt). (Company and government)
- IRS — Independent contractor (self-employed) or employee? — The IRS’s common-law rules: “all information that provides evidence of the degree of control and independence must be considered,” in three categories: behavioral, financial, and the type of relationship. Points to Form SS-8 when it stays unclear. Free. (Company and government)
- IRS — Form SS-8, Determination of Worker Status — “Firms and workers file Form SS-8 to request a determination of the status of a worker for purposes of federal employment taxes and income tax withholding.” Free. (Company and government)
- IRS — Form W-9, Request for Taxpayer Identification Number and Certification — What a contractor gives the business before the first payment: “your correct Taxpayer Identification Number (TIN) to the person who is required to file an information return with the IRS,” such as Form 1099-NEC. Free. (Company and government)
- IRS — Form 1099-NEC, Nonemployee Compensation — “Use Form 1099-NEC to report nonemployee compensation”: the year-end form for contractors paid above that year’s threshold. Free. (Company and government)
- IRS — Form W-4, Employee’s Withholding Certificate — What an employee fills in on the first day: “Complete Form W-4 so that your employer can withhold the correct federal income tax from your pay.” The state has its own form. Free. (Company and government)
- IRS — Publication 15 (Circular E), Employer’s Tax Guide — The employer’s federal guide: it “explains the requirements for withholding, depositing, reporting, paying, and correcting employment taxes.” Free. (Company and government)
- IRS — Publication 15-A, Employer’s Supplemental Tax Guide — “This publication supplements Pub. 15”; its section 2, Employee or Independent Contractor?, sets out the common-law rules (behavioral control, financial control, relationship) with examples. Free. (Company and government)
- SAM.gov — Entity registration and Unique Entity ID — Official registration for organizations pursuing federal awards, or a Unique Entity ID when that alone is appropriate. SAM registration and renewal are free. (Company and government)
- APEX Accelerators — Government contracting assistance — Find local assistance for government contracting and SAM registration. SAM.gov links to this program for free registration help. (Company and government)
- DLA — Getting started as a supplier — The Defense Logistics Agency’s route into supplier registration, SAM/CAGE information and its bidding systems. (Company and government)
- SBA — Veteran Small Business Certification (VetCert) — Certification as a veteran-owned (VOSB) or service-disabled veteran-owned (SDVOSB) small business, needed to compete for federal set-aside and sole-source contracts; at least 51% owned and controlled by veterans. Free. (Company and government)
- SBA — Certifications (8(a), HUBZone, women-owned, veteran-owned) — Federal small business certifications that open set-aside contracts. Free. (Company and government)
Patents and legal help
- USPTO — Patent basics — Official patent background and links to the application process. (Patents and legal help)
- USPTO — Find a patent practitioner — Official route to the register of active patent attorneys and agents. (Patents and legal help)
- USPTO — Patent Pro Bono Program — Find regional programs that match eligible inventors and small businesses with volunteer patent professionals. (Patents and legal help)
- USPTO — Law school patent and trademark clinics — Find supervised law-school clinics offering free patent or trademark legal services to accepted clients. (Patents and legal help)
- USPTO — Patent Public Search — Search published U.S. patent applications and patents, with beginner and advanced tools and tutorials. (Patents and legal help)
- USPTO — Patent and Trademark Resource Centers — Find a library specialist who can help you learn patent and trademark search tools and locate official information. (Patents and legal help)
- USPTO — Trademark basics — Start researching protection for a business name, product name, or logo and follow official registration guidance. (Patents and legal help)
- American Bar Association — Find Legal Help — Find state lawyer-referral and licensing resources for company formation, contracts, and other legal questions. (Patents and legal help)
- Schwegman Lundberg & Woessner — Mechanical patents — A patent-firm candidate for mechanical and electromechanical inventions, IP strategy, and patent preparation and prosecution. (Patents and legal help)
- Wolf Greenfield — Mechanical technologies — A patent-firm candidate for consumer products, industrial equipment, robotics, design protection, and product-clearance questions. (Patents and legal help)
- Rocky Mountain Patent / Hall Estill — Inventors and startups — A patent-firm candidate focused on inventors and startups, with stated mechanical and electrical expertise and patent-prosecution services. (Patents and legal help)
- USPTO — Patent rights, ownership and infringement — Understand exclusion rights, ownership and the separate infringement question. (Patents and legal help)
- USPTO — Design patents — Compare ornamental-design protection with utility protection for function. (Patents and legal help)
- USPTO — Provisional patent applications — Prepare disclosure and filing-timing questions for a patent practitioner. (Patents and legal help)
- USPTO — Trade secret toolkit — Consider secrecy, reasonable protection measures and business objectives. (Patents and legal help)
- USPTO — Patent Public Search — The USPTO's own full-text search of U.S. patents and published applications, for a first look at what exists. (Patents and legal help)
- Patentability versus freedom to operate (Mondaq) — Explains why having a patent does not clear you to sell, and when each search happens. (Patents and legal help)
- Patent grace periods and public disclosures (Sterne Kessler) — Why showing or selling before filing matters: the U.S. one-year grace period and absolute novelty abroad. (Patents and legal help)
- Manual of Patent Examining Procedure (MPEP) — USPTO patent examination policy and procedure: application contents, examination, prior art, patentability, appeals, issue. Free. (Patents and legal help)
- Trademark Manual of Examining Procedure (TMEP) — USPTO trademark examination law, practice and procedure. Free. (Patents and legal help)
- Technology licensing guides for SMEs — How technology licensing works: preparing to negotiate, key agreement terms, negotiation, competition concerns, living with the signed agreement. Guidance. Free. (Patents and legal help)
- Grace periods and absolute novelty in Europe (EPO and practitioner notes) — Europe requires absolute novelty: a public disclosure before filing, even by the inventor, can end patent rights; the US has a one-year grace period for the inventor's own disclosure (35 USC 102(b)(1)(A), MPEP 2153.01). Also https://www.epo.org/en/news-events/news/epo-consults-users-grace-periods-patents and https://www.uspto.gov/web/offices/pac/mpep/s2153.html . (Patents and legal help)
- Inventors Digest — A sell sheet primer — Keep the sell sheet simple and show the big benefit: one page, headline, benefit statement, image, a few features, patent pending if filed, contact. Free. (Patents and legal help)
- Stephen Key — licensing ideas (interviews and columns) — A licensed inventor's practice: royalty around 5% of net sales is the standard he has seen, higher possible; issued patent, working prototype and retailer interest raise it; provisional for "patent pending"; low-cost sell sheet. Also https://tim.blog/2007/11/27/how-to-rent-your-ideas-to-fortune-500-companies-part-ii-plus-hacking-japan-tips/ . One practitioner's experience; Key also sells coaching. (Patents and legal help)
Prototypes and hardware
- Xometry — CNC machining, 3D printing, sheet metal and molding through an on-demand manufacturing platform. (Prototypes and hardware)
- Protolabs — Prototype and production services including injection molding, CNC machining, 3D printing and sheet metal. (Prototypes and hardware)
- JLCPCB — Circuit boards and assembly — PCB fabrication and assembly for electronic prototypes; choose board specifications and assembly inputs for the actual design. (Prototypes and hardware)
- JLC3DP — 3D printing — JLC’s 3D-printing service for prototype parts. Check available processes, materials and finishes. (Prototypes and hardware)
- JLCCNC — Machined parts — JLC’s CNC-machining service for custom parts. Check dimensions, materials and tolerances. (Prototypes and hardware)
- Fictiv — Additional source for custom parts, including machining, molding and 3D printing. (Prototypes and hardware)
- Quickparts — Additional source for prototype and production parts, including 3D printing, machining and molding. (Prototypes and hardware)
- SendCutSend — Cut and bent sheet parts — Candidate for laser-cut or routed sheet parts, brackets, bending and finishing. (Prototypes and hardware)
- Protocase — Custom enclosures and machined parts — Candidate for prototype electronic enclosures, front panels, sheet-metal assemblies and CNC-machined housings. (Prototypes and hardware)
- MacroFab — Circuit-board assembly — Candidate for sourcing components and assembling electronic circuit boards from prototype through production. (Prototypes and hardware)
- McMaster-Carr — Hardware and ready-made CAD — A broad hardware catalog and a convenient first design reference when it has the needed part and CAD model. Existing CAD can save the designer from drawing the part. You may buy from any supplier you choose. (Prototypes and hardware)
- Fastenal — Procurement and production supply — A source for your Project Manager Bot to compare for ongoing fastener/hardware supply, sourcing and inventory needs as quantities grow. (Prototypes and hardware)
- DigiKey — Electronic components and design tools — Electronic-component sourcing plus schematic, footprint and 3D-model tools for circuit development. (Prototypes and hardware)
- MISUMI — Configurable automation components — Candidate for configurable mechanical parts, linear-motion and factory-automation components with downloadable CAD. (Prototypes and hardware)
- AutomationDirect — Controls, pneumatics and vision — Candidate catalog for PLCs, motor control, sensors, vision devices and lighting, pneumatic tubing, valves, grippers and vacuum parts. (Prototypes and hardware)
- Festo — Vacuum handling and suction cups — Candidate for vacuum generators, suction cups, vacuum grippers and accessories when designing handling equipment. (Prototypes and hardware)
Electrical and enclosures
- UL Standards & Engagement — Electrical standards — Find UL standards for the product: UL 508A for industrial control panels; UL 50 and UL 50E for electrical enclosures; UL 62368-1 for audio/video and information/communication technology equipment. (Electrical and enclosures)
- IEC — Electrical product standards — International standards: IEC 60204-1 for machinery electrical equipment; IEC 61010-1 for measurement, control and laboratory equipment; IEC 62368-1 for AV/ICT equipment; IEC 60335-1 for household appliances; IEC 60601-1 for medical electrical equipment. (Electrical and enclosures)
- CENELEC — European electrical standards (EN) — Starting point for European electrotechnical standards. EN identifies a European standard; EN IEC indicates a European adoption of an IEC standard. (Electrical and enclosures)
- IEC 60529 — Enclosure protection (IP Code) — Publisher’s source for protection against access to hazardous parts, solid objects, dust and harmful water ingress. (Electrical and enclosures)
- NFPA 70 — National Electrical Code (NEC) — Reference for electrical installations in the United States. (Electrical and enclosures)
- NFPA 79 — Electrical Standard for Industrial Machinery — Starting point for electrical equipment of industrial machines. (Electrical and enclosures)
- NEMA enclosure Types — ANSI catalog — Catalog entry for ANSI/NEMA 250 enclosure Type requirements, commonly encountered alongside UL 50E. (Electrical and enclosures)
- OSHA — Nationally Recognized Testing Laboratories — Understand applicable U.S. workplace product certification and recognized laboratory scope. (Electrical and enclosures)
- eCFR — 47 CFR 15.31 measurement standards — Review applicable radio/emissions measurement procedures and representative operating configurations. (Electrical and enclosures)
- eCFR — 47 CFR 15.212 modular transmitters — Investigate module integration, antennas and RF exposure in the final configuration. (Electrical and enclosures)
- IEC 61000-4-2:2025 — ESD immunity test method — Public scope shows what an ESD immunity method addresses and why product-specific requirements matter. (Electrical and enclosures)
- Tektronix — EMI precompliance during development — Understand the role of early prototype screening in finding interference problems before formal testing. (Electrical and enclosures)
- TÜV SÜD — EMC test planning and laboratory preparation — An automotive example of documenting modes, monitoring, variants, support equipment and acceptance. (Electrical and enclosures)
- FCC — Equipment authorization — Plain starting point for selling anything with radio or fast digital electronics in the U.S.: which approval path, labs and FCC ID search. (Electrical and enclosures)
- European Commission — RoHS Directive — EU limits on lead, mercury, cadmium and other restricted substances in electrical and electronic equipment. (Electrical and enclosures)
- UL 508A — industrial control panels — Industrial control panels for general industrial use up to 1000 V: assemblies of power and control components, wiring, terminals and enclosures, for ordinary locations installed per the NEC. Does not evaluate the loads or whether the controls supervise the whole machine. Free Digital View; copies paid. (Electrical and enclosures)
- NFPA 70E — electrical safety in the workplace — Safe electrical work practices: protection from shock, electrocution, arc flash and arc blast; helps meet OSHA electrical safety rules. A workplace standard, not a product standard. Free to view with an account (no download). (Electrical and enclosures)
- IEC 61131-3 — PLC programming languages — PLC programming languages: syntax and meaning of structured text, ladder, function block diagram; sequential function chart elements; configuration elements and communication features. Paid (CHF 475). (Electrical and enclosures)
- ISO 13849-1 — safety-related parts of control systems — Method and requirements for designing safety-related parts of machine control systems (software included), any technology, high-demand or continuous use. Does not choose the safety functions or required performance levels for a given machine. Paid. (Electrical and enclosures)
- UL 2054 — household and commercial batteries — Portable primary and rechargeable batteries (single cells and packs) as product power sources: reduce fire, explosion and injury in use and when removed for transport, storage or disposal. Does not cover the battery in its host product; the product needs its own standard. Free Digital View; PDF paid. (Electrical and enclosures)
- IEC 62133-2 — lithium cells and batteries, portable applications — Safety requirements and tests for portable sealed rechargeable lithium cells and batteries, for intended use and foreseeable misuse; includes coin cells, assembly of cells into batteries, vibration and shock. Paid. (Electrical and enclosures)
- UL 1642 — lithium cells — Lithium cells and multicell batteries, primary and rechargeable, technician- or user-replaceable: reduce fire, explosion and injury; host product must meet its own standard. 2022 revision: round-bar crush replaces impact for pouch cells. Free Digital View; PDF paid. (Electrical and enclosures)
- UN Manual of Tests and Criteria, section 38.3 — lithium battery transport tests — Section 38.3: the transport tests every lithium cell and battery type must pass before it can ship under the transport rules. Amendment 1 changes 38.3 and the definition of rupture. Supplements, does not replace, the transport regulations. Free to read online. (Electrical and enclosures)
- Lithium battery shipping guidance — Air shipping of lithium metal, lithium-ion and sodium-ion batteries: classification, UN 38.3 test summary, packaging, marks, labels, documents, training, state-of-charge limits; separate rules for batteries alone, packed with equipment, and in equipment. Guidance only, not a compliance source. Free. (Electrical and enclosures)
- 49 CFR 173.185 — lithium cells and batteries in transport — US transport rules for lithium cells and batteries, alone, packed with or in equipment: tested types, test records and summaries, protection and packaging against short circuit and damage; exceptions for small batteries, prototypes and low production runs, recycling, damaged batteries. Free. (Electrical and enclosures)
- 47 CFR Part 15 — radio frequency devices — Radio frequency devices: unintentional radiators (most electronics) and intentional transmitters. Equipment authorization, conducted and radiated emission limits, measurement, labels, user information; which rules apply depends on device type and frequency. Free. (Electrical and enclosures)
- 47 CFR Part 18 — industrial, scientific and medical equipment (includes induction heating) — Industrial, scientific and medical (ISM) RF equipment, induction heating included: good engineering practice, shielding and filtering to control emissions; the operator must fix harmful interference. Free. (Electrical and enclosures)
- KDB 680106 — wireless power transfer devices — FCC guidance on equipment authorization and RF exposure for wireless power transfer. Third-party sources report a section 5.2 exclusion (under 1 MHz, 15 W or less per transmitting element); outside it, an FCC inquiry (KDB) is needed. Unconfirmed: read on apps.fcc.gov before relying on it. (Electrical and enclosures)
- CISPR 32 / CISPR 35 — emissions and immunity of multimedia equipment — Multimedia equipment up to 600 V: CISPR 32 sets Class A/B emission limits and measurement; CISPR 35 sets immunity requirements and tests. Paid. (Electrical and enclosures)
- EMC Directive 2014/30/EU — EU: apparatus must limit disturbances and be immune enough to work in its environment. Manufacturer does conformity assessment, technical file, EU declaration of conformity and CE mark. Free. (Electrical and enclosures)
- IEC/UL 62368-1 — audio/video and ICT equipment safety — Safety of audio/video, IT and communication equipment (and office machines up to 600 V, UL): classify energy sources and provide safeguards against pain, injury and fire. Paid; UL Digital View free when registered. (Electrical and enclosures)
- IEC/UL 60335-1 — household appliance safety — General safety of household and similar appliances, battery-operated included; always used with the matching IEC 60335-2-x part. UL changes voltage scope (250 V single-phase and battery; 600 V other). Paid; UL Digital View shows national differences only. (Electrical and enclosures)
- Low Voltage Directive 2014/35/EU — EU: electrical equipment 50-1000 V AC or 75-1500 V DC must protect people, animals and property; technical file, conformity assessment, declaration, CE mark. Battery products below 75 V DC fall outside it (GPSR then applies). Free. (Electrical and enclosures)
- General Product Safety Regulation (EU) 2023/988 — EU consumer product safety where no other EU law covers the risk: only safe products; manufacturer risk analysis, technical documentation, identification and safety information, corrective action; duties for importers, distributors, EU responsible person and online marketplaces. Free. (Electrical and enclosures)
- Conformal Wearable Battery — U.S. Army battery site — Vest-worn lithium-ion battery: output about 10–20 V by version and charge, Nett Warrior connector (STANAG 4695) and bottom contacts; version 3.6.2 and later add a USB-A port. Free. (Electrical and enclosures)
- Glenair Series 807 Nett Warrior connector — The 6-pin Nett Warrior connector and the 7-pin version with USB-C power; adopted as NATO STANAG 4695; STAR-PAN hubs distribute soldier power and data. Free catalog. (Electrical and enclosures)
- L3Harris RF-7912 handheld power adapter — Runs AN/PRC-152A and AN/PRC-163 handheld radios from external DC and charges the radio battery; a benchmark for switch-over and charging behavior. Free spec sheet. (Electrical and enclosures)
- USB-IF specifications: USB 2.0, USB Type-C, USB Power Delivery — The USB data, connector and power specifications: legacy 5 V/500 mA, Type-C current advertisement, and Power Delivery negotiation. Free. (Electrical and enclosures)
- Smart Battery Data Specification and SMBus — How smart batteries report state of charge, temperature, voltage, current and requested charge settings over SMBus. Free. (Electrical and enclosures)
- Parker Chomerics Conductive Elastomer Engineering Handbook — Conductive gasket design guide: materials and fillers, profiles, deflection ranges, compression stops, flange design, corrosion and galvanic compatibility, form-in-place gaskets. Free. (Electrical and enclosures)
- Iris Technology Vulture Power Scavenger — In-line soldier power scavenger: 5–46 V DC input (solar included), offsets system-battery drain and charges a CWB or 2590 as an SMBus charger; built for Nett Warrior. A benchmark for soldier power devices. (Electrical and enclosures)
- Iris Technology Merlin HH+ radio power and data adapter — Power and data adapter for the AN/PRC-163 that runs the radio from external power while charging its battery. A benchmark for radio charging behavior. (Electrical and enclosures)
- IEC 61010-1 — safety of electrical equipment for measurement, control and lab use — Safety requirements for measuring equipment: insulation, creepage and clearance, enclosures, flammability; IEC 61010-2-030 adds measuring circuits and measurement categories (CAT II, III, IV). UL 61010-1 is the U.S. version. Paid. (Electrical and enclosures)
- ISO 20653 — degrees of protection (IP code) including IPX9K — Protection ratings for vehicle electrical equipment, including high-pressure, high-temperature water jets (IPX9K) used for washdown. Paid. (Electrical and enclosures)
- Gore protective vents (expanded PTFE membrane vents) — Pressure-equalizing vents that let air through and keep water and dust out of sealed enclosures; ratings by immersion depth. Free product data. (Electrical and enclosures)
- IEEE 299 — measuring shielding effectiveness of enclosures — The standard method for measuring how well an enclosure shields; useful when a customer asks for shielding numbers. Paid. (Electrical and enclosures)
- Battery University — lithium-ion charging basics — Plain-language articles on lithium-ion charging (CC/CV, termination, temperature limits), aging and safety; good for the project manager’s questions. Free. (Electrical and enclosures)
- Texas Instruments battery management application notes — Charger and fuel-gauge application notes: charge profiles, JEITA temperature control, power-path management, SMBus gauges. Free. (Electrical and enclosures)
- IEC 61010-2-030 — particular requirements for testing and measuring circuits — Measuring circuits and measurement categories (CAT II, III, IV) for equipment that measures mains; works with IEC 61010-1. Paid. (Electrical and enclosures)
- UL 50E — enclosures for electrical equipment, environmental considerations — Environmental ratings for enclosures (the UL side of NEMA types 4, 4X, 6, 6P, 12 and others). Paid. (Electrical and enclosures)
- IEC 60204-1 — electrical equipment of machines — The international counterpart of NFPA 79 for machine electrical equipment; often required for export machines. Paid. (Electrical and enclosures)
- EMVA 1288 — measuring and presenting machine vision camera specifications — Vendor-neutral camera data (sensitivity, noise, dark current, uniformity, defective pixels) for comparing cameras on equal terms before picking one. Free. (Electrical and enclosures)
- KiCad documentation — Free, open-source schematic and board design suite: the manual for schematic, layout, rule checks, fabrication outputs, and kicad-cli for scripted checks and exports (what a bot uses). Free. (Electrical and enclosures)
- SnapMagic (formerly SnapEDA) — symbols, footprints and 3D models — Free symbols, footprints and 3D models for KiCad and other tools, for parts KiCad’s libraries lack. (Electrical and enclosures)
- Ultra Librarian — symbols, footprints and 3D models — Free part models for KiCad and other tools, often linked from chip makers’ product pages. (Electrical and enclosures)
- LTspice — circuit simulator — Free circuit simulator from Analog Devices, with models for many power parts; try a circuit before building it. Free. (Electrical and enclosures)
- TI Power Designer (WEBENCH) — Free online tool that designs a power supply around a TI chip: part values, efficiency, a schematic and a parts list. (Electrical and enclosures)
- Interactive HTML BOM (KiCad plugin) — Free KiCad plugin that makes a clickable placement map from the board, for hand assembly and inspection. (Electrical and enclosures)
- KiBot — automated KiCad outputs — Free tool that makes every fabrication and documentation output (Gerbers, drill, BOM, placement, PDFs, IPC-2581) from one configuration file, in one command. (Electrical and enclosures)
- Altium Designer — importing a design from KiCad — How Altium’s KiCad importer turns a KiCad project into an Altium project (File, Import Wizard); which KiCad versions it supports. For a prototype shop that works in Altium. (Electrical and enclosures)
- Ucamco — Gerber format specification — The free specification of the Gerber file format that board shops build from, and a free online viewer. (Electrical and enclosures)
- IPC-2581 (IPC-DPMX) — open manufacturing data exchange format — One XML file carrying layers, drills, stack-up, netlist and parts for fabrication and assembly; KiCad exports it. Free. (Electrical and enclosures)
- IPC-2152 — current-carrying capacity of printed board traces — Trace width and copper weight for a given current and temperature rise; KiCad’s calculator applies the older IPC-2221 rule. Paid. (Electrical and enclosures)
- TI — Layout Guidelines for Switching Power Supplies (AN-1149) — The classic free note on switching power supply layout: current loops, ground planes, component placement. Free. (Electrical and enclosures)
- Analog Devices AN-1119 — low-noise layout for switching regulators — Find the switching current paths first, then place parts to keep them small; avoiding noise problems by layout. Free. (Electrical and enclosures)
- Henry Ott — Electromagnetic Compatibility Engineering (Wiley) — The standard practical book on EMC: grounding, filtering, shielding, board layout and stack-up, with little math. Paid. (Electrical and enclosures)
- 47 CFR 15.23 — home-built devices — A device built for personal use, not sold, not from a kit, five or fewer, needs no FCC equipment authorization, but must not cause harmful interference and should meet the Part 15 limits as closely as practical. Free. (Electrical and enclosures)
- TI BQ25756 — buck-boost charge controller, 1 to 14 cells — Charges 1 to 14 lithium-ion cells from 4.2 to 70 V input (so a 5-cell tool pack from USB-C 20 V), standalone with resistors or over I2C, thermistor input, reverse mode that can supply USB-C power from the battery; evaluation board and USB-C application note. Free. (Electrical and enclosures)
- ST STUSB4500 — standalone USB-C Power Delivery sink controller — Negotiates up to 20 V and 5 A (100 W) from a USB-C PD charger without a microcontroller, with settings stored in its memory. Free. (Electrical and enclosures)
- TI TPS25750 — USB-C Power Delivery controller with power switches — USB-C PD controller that can be configured as a sink (or source) without writing firmware; TI pairs it with its battery chargers in reference designs. Free. (Electrical and enclosures)
- TI BQ76920 — 3 to 5 cell battery monitor — Measures each cell of a 3 to 5 cell lithium-ion pack, with hardware over- and under-voltage protection and a thermistor input; the basis of an independent per-cell cut-off in a charger. Free. (Electrical and enclosures)
Manufacturing and testing
- NIST MEP — Manufacturing assistance centers — Find manufacturing assistance centers by location. (Manufacturing and testing)
- NIST NVLAP — Accredited laboratory directory — Find testing and calibration laboratories and their accreditation scopes. (Manufacturing and testing)
- CPSC — Small business product-safety resources — Starting guidance for consumer-product safety requirements and the Small Business Ombudsman. (Manufacturing and testing)
- Thomas — Find manufacturing suppliers — Search for machine shops, fabricators and other industrial suppliers by capability and location; useful for building a local shortlist. (Manufacturing and testing)
- FabLabs — Find a local fabrication lab — Find nearby fabrication labs for early mockups, access to tools, training and hands-on help. (Manufacturing and testing)
- NIST MEP — Product design and development — Find help with market validation, prototypes, materials, durability and commercialization. (Manufacturing and testing)
- NIOSH — Ergonomic risk factors and checklists — Screen posture, force, repetition, handling and task conditions when preparing a user trial. (Manufacturing and testing)
- NIOSH — Non-powered hand-tool selection guide — Practical hand-tool ergonomics background for grip and task evaluation. (Manufacturing and testing)
- Protolabs — Process-specific design tips — Start process-specific DFM research for machining, molding and other manufacturing methods. (Manufacturing and testing)
- Protolabs — Uniform wall thickness in molded parts — Investigate molded-part walls, sink, warpage and geometry tradeoffs. (Manufacturing and testing)
- NASA — Requirements verification matrix — A useful model for linking each requirement to a source and verification method. (Manufacturing and testing)
- NASA — Product realization, verification and validation — Understand checking specified requirements versus intended use. (Manufacturing and testing)
- NIST MEP — Supplier scouting inquiry fields — Examples of technical and commercial information needed to identify manufacturing capability. (Manufacturing and testing)
- Protolabs — Draft angle guidelines — Explain taper, mold withdrawal and release of molded parts. (Manufacturing and testing)
- Protolabs — Wall thickness, thin slots and core features — Understand how thin or deep features affect mold tooling and part manufacture. (Manufacturing and testing)
- NASA — Product verification planning — Plan facilities, samples, methods, instruments, configuration and review before verification. (Manufacturing and testing)
- NASA — Verification and validation plan outline — Appendix I provides a plan outline; associated appendices provide requirements matrices. (Manufacturing and testing)
- ISTA — Getting started with design and testing — Select package/distribution tests, representative samples and predetermined damage criteria. (Manufacturing and testing)
- ASTM D5276 — Loaded-container free-fall drop testing — Scope-level reference for free-fall drop tests of loaded shipping containers. (Manufacturing and testing)
- IEC 60068-2-31 — Rough handling shocks — Scope-level starting point for handling knocks and falls affecting equipment-type specimens. (Manufacturing and testing)
- NIST — Laboratory accreditation versus certification — Check the laboratory’s current scope for the exact methods or calibration parameters needed. (Manufacturing and testing)
- TÜV SÜD — Ingress-protection testing overview — Distinguish enclosure ingress protection and different water exposures when discussing lab work. (Manufacturing and testing)
- A.N. Creation — Test planning and templates — Plan testing while defining requirements, select appropriate prototypes, and prepare electrical/RF, drop or immersion work. (Manufacturing and testing)
- NIOSH — Ergonomics overview — Consider posture, force, repetition and the interaction between a person and the task. (Manufacturing and testing)
- Penn State OPEN Design Lab — ANSUR II — Find anthropometric background and investigate variation when planning physical fit. (Manufacturing and testing)
- FDA — Applying Human Factors and Usability Engineering to Medical Devices — Study intended users, environments, critical tasks and evaluation of use-related risks in medical-device work. (Manufacturing and testing)
- FDA — Packaging and food contact substances — What materials touching food or drink must meet. (Manufacturing and testing)
- CPSC — Children’s products — Rules for products made for children 12 and under: third-party testing at an accepted lab, a Children’s Product Certificate, tracking labels. (Manufacturing and testing)
- ECHA — REACH regulation — EU rules on chemicals in products, including substances of very high concern in articles. (Manufacturing and testing)
- Design for Manufacture and Assembly method — Design for assembly first (is each part needed; handling and insertion difficulty), then design for manufacture of the remaining parts (material, process, geometry, tolerances, tooling, cost at target volume). A method, not a standard. Free to read; software paid. (Manufacturing and testing)
- Resin supplier part design, processing and drying guides — Supplier guides cover properties for design (moisture, dimensional stability, chemical resistance), molding, joining and conditioning; nylon must be molded dry. Grade-specific settings are on each grade's processing data sheet. Use the guide from the supplier of the chosen resin. (Manufacturing and testing)
- UL Prospector — plastic material data sheets — Search and compare resin data sheets by keyword, maker or product; request samples; includes UL Yellow Cards. Free membership for documents; advanced plastics search is paid. A research tool, not a requirement. (Manufacturing and testing)
- Mold classifications (Class 101-105) — The mold buyer's guide: mold classifications (101-105) and expected life for quoting and ordering, plus sample progress-report and mold-data quote forms. Class details are not public. Paid for non-members; free for PLASTICS members. (Manufacturing and testing)
- Scientific/decoupled molding articles and training outlines — Decoupled molding workshop: machine qualification, mold evaluation and process development in a set order (injection speed linearity, check-ring repeatability, melt temperature, cavity imbalance, gate seal, cooling). Training, not a standard. Articles free; workshop paid. (Manufacturing and testing)
- Robust Process Development and Scientific Molding (book) — Scientific molding and processing for robust, repeatable processes: polymer behavior, drying and rheology tied to cosmetic and dimensional process development; procedures, DOE, mold release planning, troubleshooting (cooling, venting, regrind). Method book, not a standard. Paid. (Manufacturing and testing)
- Scientific molding and troubleshooting articles (John Bozzelli) — Machine evaluation, velocity control and consistent fill times, gate seal studies, regrind, molding safety; practical problem solving and cycle reduction. Free to read. (Manufacturing and testing)
- Molding troubleshooting guides — Defects with photos and fixes for engineering thermoplastics: weld lines, delamination, burning, streaks, stress cracking, unmelt, short shots, warp, mold deposits. Nonbinding supplier advice. Free. Use the guide from the chosen resin's supplier. (Manufacturing and testing)
- ASHRAE Handbook — HVAC Systems and Equipment (chillers, cooling towers, pumps, piping) — Design and equipment reference: central cooling plants, hydronic and condenser water systems, cooling towers, liquid chillers, centrifugal pumps, valves, heat exchangers. Paid; contents free. I-P and SI versions. (Manufacturing and testing)
- Cooling tower codes and guidelines — Cooling tower acceptance testing, sound, performance, water treatment and materials. STD-201: certified tower lines must perform to published ratings, verified by a CTI-licensed test agency. Paid publications. (Manufacturing and testing)
- ASHRAE 188 — Legionellosis risk management for building water systems — Minimum Legionella risk management for building water systems, cooling towers included: building survey, water management program, preventive measures, design, commissioning. Enforceable language for code adoption; an addendum adds Legionella testing requirements. Free read-only view; copy paid. (Manufacturing and testing)
- ASHRAE Guideline 12 — managing Legionella risk in water systems — How to comply with Standard 188: what spreads Legionella; covers potable water, cooling towers and condensers, coolers, misters; testing and PPE appendices. Guidance, not requirements. Free read-only view. (Manufacturing and testing)
- Process chiller and mold temperature controller sizing guides — Mold temperature controllers (water and oil): selection data for temperature range, pump, flow, pressure, heater, power, connections. No non-blog process chiller sizing guide found yet. Free. (Manufacturing and testing)
- Resin dryer and conveying sizing guides — Dryer sizing: find resin and throughput, pick the dryer from the throughput chart, hopper capacity = drying time x throughput. Conveying sized by throughput, distance and line size. Equipment selection, not a standard. Free. (Manufacturing and testing)
- ANSI/A3 R15.06 — industrial robot safety — US adoption of ISO 10218-1/-2:2025: industrial robots (Part 1) and robot applications and cells (Part 2), risk assessment and safe use; Part 3 is guidance for cell users. Paid ($769; members $655). (Manufacturing and testing)
- ISO 10218-1/-2 — robots and robot systems safety — Part 1: safe design and information for use of industrial robots as machines. Part 2: integrating robot applications and cells, from design and commissioning to decommissioning. Paid. (Manufacturing and testing)
- ISO/TS 15066 — collaborative robots — Collaborative industrial robot systems and their workspaces, supplementing ISO 10218. Not for non-industrial robots; principles may still help elsewhere. Paid. (Manufacturing and testing)
- ISO 12100 — machinery risk assessment — Machinery safety basics: terms, design principles, and the risk assessment and risk reduction method that the specific machine standards build on. Paid. (Manufacturing and testing)
- ANSI B11.0 — safety of machinery — Power-driven machines not hand-portable, new, existing, modified or rebuilt, with controls and sensors: identify hazards, estimate and evaluate risk, reduce it through the life cycle. Deviations need a documented risk assessment. Paid. (Manufacturing and testing)
- ANSI B11.19 — risk reduction measures (guarding) — Performance requirements for risk reduction measures: inherently safe design, guards, safety control functions, protective devices, administrative controls; design, install, operate, maintain. Does not pick the measure for an application. Paid. (Manufacturing and testing)
- 29 CFR 1910.212 — machine guarding — US workplace law: guard point of operation, nip points, rotating parts, chips and sparks; guards secured and not hazards themselves; anchor fixed machinery. Free. (Manufacturing and testing)
- 29 CFR 1910.147 — lockout/tagout — US workplace law, lockout/tagout: written energy control procedures, training, periodic inspections; isolate, release stored energy and verify before servicing; lockout unless tagout is equivalent. Free. (Manufacturing and testing)
- ANSI/PLASTICS B151.1 — injection molding machine safety (horizontal and vertical) — Safety of injection molding machines for people working on or near them. The 2017 edition merged the horizontal (B151.1) and vertical (B151.29) standards; the mechanical jam bar became optional on horizontal machines built to it. Paid ($225; members less). (Manufacturing and testing)
- ASTM D4169 — performance testing of shipping containers — Lab performance test for shipping containers and units: a sequence of distribution hazards (handling, vibration, compression and others) at representative levels on the same unopened packages. Not evaluated for hazardous materials. Paid. (Manufacturing and testing)
- Lean Lexicon and lean tools — Illustrated glossary of 207 lean terms (kanban, kaizen, standardized work, takt, pull, value stream mapping; new: hoshin kanri, daily management, lean product development). Book paid; online lexicon terms free. (Manufacturing and testing)
- Advantage Engineering — chiller sizing for plastics processing (FYI 073) — Chiller maker's sizing sheet: hydraulics about 0.1 ton per hydraulic motor hp on injection molding machines; about 0.5 ton per feed throat; material load by pounds per hour. Equipment-maker guidance, not a standard. (Manufacturing and testing)
- Plastics Technology — plastics processing data card (2022) — Quick-reference card: hydraulic cooling about 0.1 ton/hp; feed throat about 1 ton on machines 500 tons and up, 0.5 ton below; other processing rules of thumb. Trade magazine reference. (Manufacturing and testing)
- Entec Polymers — Troubleshooting Guide for Injection Molding — Free guide organized by defect, cause and solution. (Manufacturing and testing)
- Douglas M. Bryce — Troubleshooting: A Guide for Injection Molders — Defect-by-defect guide (black specks, blisters, burns, flash, flow lines, sink, splay, short shots, warp) with causes and remedies. Author has 40+ years in thermoplastic injection molding. Link is a user upload; buy or find the publisher's copy for use. (Manufacturing and testing)
- Kerkstra and Brammer — Injection Molding Advanced Troubleshooting Guide — Book organized by problem and solution; covers splay, sink, short shot, flash, jetting and more. Paid. (Manufacturing and testing)
- Moldex3D — injection molded part problems and solutions — Short defect definitions with mechanisms (example: burn marks from trapped air overheating). Free PDF. (Manufacturing and testing)
- DuPont — General Design Principles for Engineering Polymers (Module I) — Classic resin-maker design guide: wall thickness, ribs, bosses, draft, radii, snap and press fits, assembly. One of the guides the office learned from and still uses. Free PDF (copy hosted by a university; another by Emco Plastics). (Manufacturing and testing)
- Covestro — Engineering Polymers: Part and Mold Design, Thermoplastics (a design guide) — Resin-maker guide to part and mold design for thermoplastics. Its material data are examples only; use the current grade data sheets. Free PDF. (Manufacturing and testing)
- Michel Biron — Material Selection for Thermoplastic Parts — Book on choosing thermoplastics: about 300 subfamilies, 20+ properties each; notes that nearly half of plastic failures trace back to the original material specification and selection. Paid. (Link found via search; use a publisher or library listing to buy.) (Manufacturing and testing)
- MCAM (Mitsubishi Chemical) — Plastic material selection guide — Five-step thermoplastic selection guide; chemical resistance depends on concentration, temperature, time and stress, so test under end-use conditions. Free. (Manufacturing and testing)
- Protolabs — Thermoplastic material selection for injection molding — Guide for choosing a resin from loads, stresses and environment; where life safety is involved, engineer every part and select the material accordingly. Free. (Manufacturing and testing)
- IPC-A-610 — acceptability of electronic assemblies — What acceptable solder joints and assemblies look like, by class; Class 3 for military and harsh environments. Paid. (Manufacturing and testing)
- J-STD-001 — requirements for soldered electrical and electronic assemblies — Soldering materials, processes and training requirements, by class; a space addendum covers space hardware. Paid. (Manufacturing and testing)
- IPC-6012 — rigid printed board qualification and performance — Board fabrication requirements by class; Class 3 for military products. Paid. (Manufacturing and testing)
- IPC-CC-830 — conformal coating qualification — Qualification of conformal coating materials (acrylic, urethane, silicone, epoxy, parylene and newer types); replaced MIL-I-46058C. IPC-HDBK-830 is the guide. Paid. (Manufacturing and testing)
- IPC/WHMA-A-620 — cable and wire harness assemblies — Acceptance requirements for cables and harnesses, by class. Paid. (Manufacturing and testing)
- ANSI/ESD S20.20 — ESD control program — Requirements for an electrostatic discharge control program in a factory handling sensitive parts. Paid. (Manufacturing and testing)
- ODVA — EtherNet/IP — The industrial Ethernet protocol used by many PLCs, drives and cameras in North American plants. Overview free. (Manufacturing and testing)
- 80/20 aluminum extrusion framing catalog and design guide — Aluminum T-slot extrusion, fasteners and accessories for machine frames, guarding and fixtures; the catalog has load and deflection data. Free. (Manufacturing and testing)
- Edmund Optics imaging resource guide — Application notes on lenses, field of view, resolution, depth of field and lighting for machine vision. Free. (Manufacturing and testing)
- Nordson EFD fluid dispensing guides — Dispensing methods (time-pressure, positive displacement, jetting), dot control and maintenance for adhesives and fluids. Free. (Manufacturing and testing)
- Clippard pneumatic logic and valve guides — Air-logic elements (AND, OR, NOT, timers, memory), miniature valves and application examples for pneumatic-only control. Free catalog. (Manufacturing and testing)
- Machinery’s Handbook (Industrial Press) — The standard reference for machining, fits and tolerances, threads, fasteners and material properties. Paid. (Manufacturing and testing)
- IPC-2221 — generic standard on printed board design — Board design rules: conductor spacing for voltage, current capacity, vias, lands; the basis for creepage and clearance on boards. Paid. (Manufacturing and testing)
- IPC-7711/7721 — rework, modification and repair of electronic assemblies — Approved methods for reworking and repairing boards and assemblies. Paid. (Manufacturing and testing)
- J-STD-033 — handling moisture-sensitive devices — Storage, baking and floor-life rules for moisture-sensitive parts before reflow (with J-STD-020 classification). Paid. (Manufacturing and testing)
- SOLIDWORKS API Help — The official reference for every SOLIDWORKS API interface and call, with examples in VBA, VB.NET and C#; pick the help for your SOLIDWORKS version (also under Help, API Help Topics). Tell a bot to look up each call here instead of guessing. Free. (Manufacturing and testing)
- SOLIDWORKS — recording and running macros — Recording a macro is the quickest way to see the API calls behind a manual step; record, clean up, then hand the code to the agent as a working example. Free. (Manufacturing and testing)
- CodeStack — SOLIDWORKS API examples and macros — A large free library of SOLIDWORKS API, PDM API and VBA examples, macros and tutorials (xarial/codestack on GitHub); good working examples to give a bot. Free. (Manufacturing and testing)
- xCAD.NET — framework for SOLIDWORKS add-ins and scripts — A free, open-source .NET framework that simplifies the SOLIDWORKS API for C# and VB.NET add-ins and stand-alone tools. (Manufacturing and testing)
- SOLIDWORKS MCP servers (community, on GitHub) — Community MCP servers let Claude Code, Codex and other agents call SOLIDWORKS directly through its COM API: some read the API documentation only, some build parts, sketches and features, some make drawings. Examples: haunchen/solidworks-mcp (drawings; works with Claude Code and Codex), Eduardof0nt/Solidworks-MCP-Server (modeling, assemblies, drawings), arthurle3210/swapi-pilot-solidworks-mcp (API documentation lookup). Free. (Manufacturing and testing)
- Model Context Protocol — The open standard bots use to connect to tools such as SOLIDWORKS or KiCad servers; explains servers, clients and how to connect one. Free. (Manufacturing and testing)
- Claude Code documentation — How to install and run Claude Code, write its CLAUDE.md instructions file, and connect MCP servers. Free. (Manufacturing and testing)
- OpenAI Codex documentation — How to install and run Codex, write its AGENTS.md instructions file, and connect MCP servers. Free. (Manufacturing and testing)
- CadQuery — Python code-CAD — Free Python library for parametric 3D models written as code, exported as STEP or STL; bots write it more reliably than SOLIDWORKS API calls, for simple parts and 3D-printed enclosures. (Manufacturing and testing)
- build123d — Python code-CAD — Free Python CAD library on the same kernel as CadQuery, with a more readable style; exports STEP and STL. (Manufacturing and testing)
Standards and specifications
- ISO 9001 — Quality management — Publisher’s page for the general quality-management standard. (Standards and specifications)
- IAQG — Aerospace quality standards — Publisher’s directory for the 9100 family and related aerospace quality standards. (Standards and specifications)
- IATF 16949 — Automotive quality — Official starting point for the automotive quality-management standard. (Standards and specifications)
- ISO 13485 — Medical-device quality — Publisher’s page for medical-device quality management. (Standards and specifications)
- A.N. Creation — Design risk and troubleshooting — Quality planning led by your Project Manager Bot: critical quality points, FMEA, control plans, troubleshooting, requirements/QFD, tolerances, GD&T and mistake-proofing, with templates. (Standards and specifications)
- ASQ — Failure mode and effects analysis — Understand design and process FMEA and plan actions against failure modes. (Standards and specifications)
- ASQ — Quality function deployment — Connect customer needs to technical characteristics using QFD and the House of Quality. (Standards and specifications)
- ASQ — Mistake-proofing (poka-yoke) — Prevent incorrect assembly or detect errors where they happen. (Standards and specifications)
- ASQ — Root cause analysis — Investigate observed problems and verify corrective action. (Standards and specifications)
- ASQ — Five Whys — Explore contributing causes behind an observed problem. (Standards and specifications)
- ASQ — Quality tools directory — Find fishbone diagrams, Pareto charts, check sheets and other improvement tools. (Standards and specifications)
- ASME Y14.5 — Dimensioning and tolerancing — Publisher’s catalog for the language of GD&T, geometric controls and datum references. (Standards and specifications)
- NIST — Tolerance synthesis scheme — Technical background connecting component tolerances to assembly requirements. (Standards and specifications)
- ASQ — Quality plans — Understand quality objectives, responsibilities, controls and supporting records. (Standards and specifications)
- AIAG — Connected quality core tools — See how quality planning, FMEA, control plans, measurement and process controls connect. (Standards and specifications)
- IEC — IEC 62366-1 usability engineering — Identify the medical-device usability-engineering standard and its safety-related scope. (Standards and specifications)
- FDA — Classify your medical device — Official first step for anything that diagnoses, treats or monitors a health problem: is it a device, and which class (I, II, III). (Standards and specifications)
- FDA — Product classification database — Search similar existing devices to find the likely device class, product code and regulation number. (Standards and specifications)
- FDA — Premarket submissions (510(k), De Novo, PMA) — Which submission a device class usually needs before it can be sold. (Standards and specifications)
- FAA — Drones (UAS) — Official starting point for anything that is, or goes on, a drone. (Standards and specifications)
- FAA — Aircraft certification — Starting point for parts installed on certified aircraft. (Standards and specifications)
- CPSC — Recalls and product safety warnings — Search recalls on similar products by product type and hazard. What went wrong for others is the cheapest start on the FMEA. (Standards and specifications)
- SaferProducts.gov — Consumer incident reports — Public reports of injuries and hazards with consumer products, often before a recall exists. (Standards and specifications)
- Quality-One — APQP overview — Plain overview of Advanced Product Quality Planning: what the first planning phase produces (design goals, rough parts list, process flow, special characteristics, timing). (Standards and specifications)
- ASTM D955 — measuring mold shrinkage of thermoplastics — Mold shrinkage of thermoplastics: cavity vs molded dimensions at 24 and 48 h on standard specimens. Comparable data only; does not predict shrink in real parts with different flow, wall and process. Paid; scope free. (Standards and specifications)
- ASME Y14.5.1 — mathematical definition of dimensioning and tolerancing — Mathematical definitions of GD&T so actual values can be determined, for drawings, exchange formats and databases. Defines the math behind Y14.5; does not replace Y14.5 drawing practice. Paid. (Standards and specifications)
- ASME Y14.41 — digital product definition data practices — Requirements for preparing and revising digital product definition data (model-based data sets and digital drawings): exceptions and additions to the other ASME Y14 standards; where it is silent, those apply. Paid. (Standards and specifications)
- ISO 1101 — geometrical product specifications and tolerancing, for international drawings — ISO GPS symbol language for geometrical tolerances and the rules to read it; direct annotation, with model-based equivalents under ISO 16792. For prints that go to ISO-system suppliers. Paid. (Standards and specifications)
- UL 94 — flammability of plastic materials — Lab flammability tests of plastics (small flame, radiant heat) on standard specimens. A preliminary indication only: the end product and its own standard decide the required rating. Not fire resistance, smoke or heat release. Free Digital View for registered users; PDF paid. (Standards and specifications)
- UL 746C — polymeric materials in electrical equipment — Polymeric parts in electrical equipment: tests for the parts and the equipment containing them, using small-scale property data; excludes insulation systems (UL 1446). 3D-printed parts evaluated from the end part. Free Digital View; PDF paid. (Standards and specifications)
- 21 CFR Part 177 — indirect food additives, polymers — Which polymers may be used in food-contact articles and under what conditions: composition, permitted substances, use limits, extraction limits and tests, per polymer and use; not a blanket approval. Free. (Standards and specifications)
- NSF/ANSI 51 — food equipment materials — Public health and sanitation for materials and finishes used in commercial foodservice equipment, including components such as tubing, sealants, gaskets and valves. Paid; scope free. (Standards and specifications)
- NSF/ANSI 2 — food equipment — Minimum food protection and sanitation for food handling equipment: materials, design, fabrication, construction, performance (kitchen, cafeteria, pantry units, tables, counters, shelves, sinks). Paid; scope free. (Standards and specifications)
- NSF/ANSI 4 — commercial cooking, rethermalization and powered hot food holding — Food protection and sanitation for commercial cooking, rethermalization and powered hot food holding and transport equipment: materials, design, construction, performance (ovens, kettles, hot beverage makers, hot food holding and transport cabinets). Paid; scope free. (Standards and specifications)
- FDA Food Code — Model food safety code for retail and foodservice (illness policies, cooling, sanitizer temperatures, allergen cross-contact, cleaning of food-contact surfaces). Binding only where a jurisdiction adopts it. Free. (Standards and specifications)
- ASTM D543 — resistance of plastics to chemical reagents — Chemical resistance of plastics: immersion, and reagent exposure under strain; measure weight, size, appearance and strength before and after. For a real application, match reagent, concentration, time, temperature and stress. Paid; scope free. (Standards and specifications)
- ISO 1043 / ISO 11469 — plastic symbols and part marking — ISO 1043: standard abbreviations for polymers, fillers and reinforcements, plasticizers, flame retardants. ISO 11469: the marking on plastic parts (e.g. >PC<) using those abbreviations, for recovery and disposal; does not set the marking method. Paid. (Standards and specifications)
- 21 CFR Part 820 — medical device practices — FDA rules for finished medical devices: written practices that meet ISO 13485:2016 plus FDA additions (records, labeling and packaging controls). Free. (Standards and specifications)
- ISO 14971 — medical device risk management — Medical device risk management through the life cycle: identify hazards, estimate, evaluate, control and monitor risk; manufacturer sets risk acceptability criteria. Paid. (Standards and specifications)
- IEC 60601-1 — medical electrical equipment safety — General basic safety and essential performance of medical electrical equipment; used with collateral and particular standards, never alone where a particular exists. Paid. (Standards and specifications)
- PPAP manual — Production part approval: show from a real production run at rate that the process makes parts meeting the design record and specifications, consistently. Paid. (Standards and specifications)
- AIAG APQP manual and Control Plan manual — APQP: launch planning, sourcing, change management, metrics, risk, gated management. Control Plan: building and using control plans, linked to APQP; adds a Safe Launch phase and guidance for highly automated lines. Paid. (Standards and specifications)
- AIAG-VDA FMEA handbook — Harmonized AIAG and VDA FMEA method: design FMEA, process FMEA, and FMEA for monitoring and system response. Paid. (Standards and specifications)
- Measurement Systems Analysis (MSA) manual — How to assess measurement systems (gauge studies) so the data supports decisions. Paid. (Standards and specifications)
- Statistical Process Control (SPC) manual — Harmonized statistical process control for the automotive supply chain: approving, monitoring and controlling processes; supports production readiness, APQP, PPAP and control plans. Paid. (Standards and specifications)
- Six Sigma Black Belt and Green Belt bodies of knowledge — Black Belt and Green Belt exam topics and depth: Six Sigma principles, team leadership, DMAIC, tools, data-driven problem solving. Competency frameworks, not product standards. BoKs free; exams and handbooks paid. (Standards and specifications)
- NIST/SEMATECH e-Handbook of Statistical Methods — Practical statistics for engineers: exploratory analysis, measurement and process characterization, modeling, improvement (DOE), monitoring (SPC), comparisons, reliability, with worked examples. Free. (Standards and specifications)
- AS9102 — first article inspection — Requirements for doing and documenting first article inspection (aerospace), alongside customer and legal requirements; rev C strengthens planning, evaluation and redoing FAI, aligned with 9100. Paid. (Standards and specifications)
- The Lean Six Sigma Pocket Toolbook — quick reference to nearly 100 tools — Quick reference to nearly 100 Lean and Six Sigma tools for quality and speed, including SIPOC, value stream maps, value-add analysis, project selection and Kaizen DMAIC. Paid book. (Standards and specifications)
- Thermo Fisher — Chemical resistance guide for plastics (labware) — Chemical resistance by resin family and chemical, with an explanation of environmental stress cracking (stress + agent + susceptible resin; detergents, oils and surface-active chemicals are common agents). A starting point; test under your own conditions. Free. (Standards and specifications)
- Tolerance stack-up methods: worst case, RSS and Monte Carlo (overviews) — Worked worst-case vs RSS example and method trade-offs (worst case guarantees assembly; statistical methods accept a small share out). Also https://www.patsnap.com/fr/resources/blog/rd-blog/tolerance-stack-up-analysis-methods-patsnap-eureka/ and https://richconn.com/tolerance-stacking/. Introductory; ASME Y14.5 and a tolerancing text are the authorities. (Standards and specifications)
- Bryan R. Fischer — Mechanical Tolerance Stackup and Analysis — The standard book on stacks: worst-case and statistical analysis, GD&T in stackups, floating and fixed fastener formulas, what-if changes to tolerancing schemes. The author worked on ASME Y14.5. Paid. (Standards and specifications)
- Paul Drake Jr. — Dimensioning and Tolerancing Handbook — Practitioner handbook: traditional and statistical stack analysis, multi-dimensional tolerance analysis. Paid. (Standards and specifications)
- AS9100 — aviation, space and defense requirements — ISO 9001 plus aviation, space and defense requirements: operational risk, configuration management, product safety, counterfeit-part prevention, supplier flow-down, first article. A limited revision is being published as IA9100. Paid. (Standards and specifications)
- AS9145 — aerospace APQP and PPAP — Advanced product quality planning and production part approval for aviation, space and defense; applies when the customer invokes it. Paid. (Standards and specifications)
- AS5553 — counterfeit electronic parts: avoidance, detection, mitigation — Buying electronic parts from authorized sources, detecting suspect parts, and reporting. Often flowed down with DFARS 252.246-7007/7008. Paid. (Standards and specifications)
- EIA-649 — configuration management standard — Configuration identification, change control, status accounting and audits; MIL-HDBK-61 is the defense handbook companion. Paid. (Standards and specifications)
- ISA-TR88.00.02 — PackML machine states — A standard state model (stopped, idle, execute, held, aborted and others) and tag naming that many plants expect from automated machines. Paid; OMAC publishes overviews free. (Standards and specifications)
- ISO 13849-2 — validation of safety-related control functions — How to validate that each safety function meets its required performance level, with fault lists and tests. Paid. (Standards and specifications)
- ISO 4414 — pneumatic fluid power: safety rules for systems — General rules and safety requirements for pneumatic systems on machinery: energy isolation, pressure control, component selection. Paid. (Standards and specifications)
- ISO 8573-1 — compressed air purity classes — Classes for particles, water and oil in compressed air; used to specify air that touches the product. Paid. (Standards and specifications)
- ISO 10993 — biological evaluation of medical devices — The series used to evaluate the biocompatibility of materials, including adhesives, that touch the body; adhesive makers sell grades tested to parts of it. Paid. (Standards and specifications)
- ISO 13851 — two-hand control devices — Types of two-hand controls (concurrent actuation, release, no tie-down), their requirements and placement. Paid. (Standards and specifications)
- ISO 14119 — interlocking devices associated with guards — Choosing and applying door interlocks and guard locking, and preventing defeat. Paid. (Standards and specifications)
- ISO 1219 — fluid power graphical symbols and circuit diagrams — The symbols for drawing pneumatic schematics. Paid. (Standards and specifications)
- ISO/IEC 17025 — competence of testing and calibration laboratories — What lab accreditation means; check that a test lab is accredited with the exact methods in its scope. Paid. (Standards and specifications)
- AS6174 — counterfeit materiel: assuring acquisition of authentic materiel — Counterfeit prevention for materiel other than electronic parts; companion to AS5553. Paid. (Standards and specifications)
- ISO 13855 — positioning of safeguards with respect to approach speed — Safety distance calculations for light curtains, two-hand controls and interlocked guards. Paid. (Standards and specifications)
- ISO 13850 — emergency stop function — Design principles for emergency stop devices and functions. Paid. (Standards and specifications)
- ISPE GAMP 5 — risk-based approach to computerized system validation — How regulated manufacturers validate computerized systems, including machine controls and vision; used when the customer requires software validation. Paid. (Standards and specifications)
- FDA — General Principles of Software Validation — FDA guidance on validating software, including production and quality-system software; background for vision and controls validation on medical device lines. Free. (Standards and specifications)
- ASTM E2930 — pressure decay leak test method — How to set up and calculate a pressure decay leak test on a rigid sealed part (a fast, objective production leak check for sealed enclosures). Paid. (Standards and specifications)
- ASME Y14.100 — engineering drawing practices — The baseline requirements for preparing and revising engineering drawings and their associated lists: the starting point for drawings a shop can quote and make from. Used with Y14.24, Y14.34, Y14.35, Y14.41 and Y14.5. Paid. (Standards and specifications)
- ASSIST Quick Search — Official starting point for defense and federal specifications, standards, and related documents. (Standards and specifications)
- MIL-STD-810 — Environmental engineering and laboratory tests — A source to investigate when environmental conditions and testing are part of a defense project. (Standards and specifications)
- MIL-STD-2073-1 — Military packaging — A source to investigate when the project has military packaging requirements. (Standards and specifications)
- MIL-STD-129 — Shipment and storage marking — A source to investigate for military shipment and storage markings. (Standards and specifications)
- MIL-STD-461 — Electromagnetic interference — Military requirements for equipment and subsystem electromagnetic emissions and susceptibility. (Standards and specifications)
- MIL-STD-464 — electromagnetic environmental effects for systems — System-level E3 requirements: platform compatibility, lightning, electrical bonding and others; companion to MIL-STD-461 for subsystems. Free from ASSIST (search the number). (Standards and specifications)
- MIL-DTL-83528 — conductive elastomer gasket material — Electrically conductive elastomer shielding gasket materials, by type and filler. Free from ASSIST (search the number). (Standards and specifications)
- MIL-DTL-5541 — chemical conversion coatings on aluminum — Conversion coating on aluminum; Type II has no hexavalent chromium; Class 3 is for low electrical resistance (gasket lands, bonding points). Free from ASSIST. (Standards and specifications)
- MIL-PRF-8625 — anodic coatings for aluminum — Anodize types and classes; anodize insulates, so gasket and bonding surfaces are masked. Free from ASSIST. (Standards and specifications)
- MIL-STD-889 — dissimilar metals and galvanic compatibility — Which metals can touch without galvanic corrosion, and how to protect couples that must; key for gaskets, fasteners and connectors in salt fog. Free from ASSIST. (Standards and specifications)
- MIL-DTL-27500 — shielded and jacketed cable — Multi-conductor shielded, jacketed cable built from qualified wire; the usual military shielded cable. Free from ASSIST. (Standards and specifications)
- MIL-STD-130 — identification marking of U.S. military property — Nameplates and part marking, including the 2D data-matrix Unique Item Identifier (UID) when required. Free from ASSIST. (Standards and specifications)
- MIL-STD-882 — system safety — Hazard identification, risk assessment and mitigation through the life of a system. Free from ASSIST. (Standards and specifications)
- MIL-STD-1472 — human engineering — Design criteria for equipment people wear and handle: weight, size, edges, gloved operation, connectors and labels. Free from ASSIST. (Standards and specifications)
- DoD SD-22 — Diminishing Manufacturing Sources and Material Shortages guidebook — Managing parts obsolescence: monitoring, last-time buys, alternates, redesign. Free. (Standards and specifications)
- MIL-DTL-38999 — high-density circular connectors — The common military circular connector family: environmental sealing, shell sizes, inserts, sealing caps. Free from ASSIST. (Standards and specifications)
- MIL-DTL-26482 — miniature circular connectors — Bayonet-coupled miniature circular connectors, sealed versions available; a lower-cost military choice. Free from ASSIST. (Standards and specifications)
- MIL-HDBK-454 — general guidelines for electronic equipment — Common design guidelines for military electronic equipment: parts, materials, processes, safety, marking, workmanship. Free from ASSIST. (Standards and specifications)
- MIL-PRF-32383 — rechargeable sealed batteries for portable military electronics — General performance specification for sealed rechargeable batteries that power portable military communications electronics; individual batteries are defined on slash sheets (several are lithium-ion). Free from ASSIST. (Standards and specifications)
- MIL-STD-1275 — 28 volt DC input power to military vehicles — Steady-state range, starting disturbances, surges, spikes, ripple and reverse polarity at the input of equipment powered from a ground vehicle; applies only if the equipment runs or charges from vehicle power. Free from ASSIST. (Standards and specifications)
Customers and selling
- SBA — Business planning and market research — Start with the market-research section: define customers, compare competing solutions and test demand, pricing and market size. (Customers and selling)
- Census Business Builder — Explore U.S. customer demographics and business activity by location and industry; download maps and reports for market research. (Customers and selling)
- Google Trends — Compare search interest in product terms across time and places to explore terminology, seasonality and possible customer questions. (Customers and selling)
- Google — Search Engine Optimization Starter Guide — Learn how to make a website easier for people and search engines to understand and discover. (Customers and selling)
- HubSpot Academy — Digital marketing course — An introductory course covering marketing strategy, content, search, email, social media and advertising. (Customers and selling)
- FTC — Advertising and marketing guidance — Check product claims, endorsements, reviews, influencers, Made in USA statements and other advertising topics before publishing. (Customers and selling)
- FTC — Commercial email (CAN-SPAM) guide — Use the official checklist when planning promotional email, including business-to-business campaigns. (Customers and selling)
- A.N. Creation Office press kit — The approved facts, key messages and never-say list, boilerplate descriptions, Mike’s bio, ready posts and replies, social cards and PDFs. The source of truth for anything said about the A.N. Creation Office or Advance Now. Free. (Customers and selling)
- LinkedIn Professional Community Policies — What LinkedIn allows and removes: authenticity, spam, fake engagement, automation. Free. (Customers and selling)
- LinkedIn Engineering blog (feed ranking posts) — LinkedIn’s own engineers on how the feed retrieves and ranks posts; the primary source behind most “LinkedIn algorithm” articles. Free. (Customers and selling)
- LinkedIn Help — newsletters — How LinkedIn newsletters work: who can create one, subscriber notifications and email, up to five per account or page. Free. (Customers and selling)
- LinkedIn Help — create a LinkedIn Page newsletter — Newsletters from a company page (Advance Now): admin rights, access criteria, steps. Free. (Customers and selling)
- LinkedIn Help — Content Credentials (labels for computer-made content) — LinkedIn labels images and video carrying C2PA Content Credentials, showing whether artificial intelligence made or edited them. Free. (Customers and selling)
- C2PA — Content Credentials standard — The open standard for marking how an image or video was made (including by artificial intelligence), used by LinkedIn and many image tools. Free. (Customers and selling)
- X For You algorithm (open source, xai-org/x-algorithm) — X’s published ranking code: candidates from follows and predicted interests, ranked by a Grok-based model predicting replies, reposts, likes, bookmarks, follows, reports and blocks. Free. (Customers and selling)
- The X Rules — What X allows: safety, privacy, authenticity, spam. Free. (Customers and selling)
- X — platform manipulation and spam policy — What counts as fake engagement, follow churn, multiple accounts and automation on X; what gets accounts limited. Free. (Customers and selling)
- X Help — X Premium — What the paid tiers include (longer posts, editing, reply placement and more). Free to read. (Customers and selling)
- Hacker News guidelines — What belongs on Hacker News, titles, and the rule against using it mainly for promotion. Free. (Customers and selling)
- Show HN guidelines — Show HN is for things people can try that the poster made; title format, no vote requests; moderators have asked for posts written by hand, not by artificial intelligence. Free. (Customers and selling)
- Reddit Content Policy — Rule 2: post authentic content in communities where you have a personal interest; no spam or vote manipulation. Each subreddit adds its own rules. Free. (Customers and selling)
- Reddiquette — Reddit’s informal etiquette, including the spirit behind the common “mostly participate, rarely self-promote” rule of thumb. Free. (Customers and selling)
- Product Hunt — launch guide — Product Hunt’s own guidance for makers launching a product: preparation, launch day, the maker comment; no vote solicitation. Free. (Customers and selling)
- YouTube Creators — YouTube’s official help for creators: channel setup, Shorts, titles and thumbnails, analytics. Free. (Customers and selling)
- Matchmaker.fm — podcast guest matching — A directory that matches podcast hosts with guests; one way to find shows looking for guests. Free tier. (Customers and selling)
- PodcastGuests.com — A directory and newsletter of podcasts seeking guests. Free tier. (Customers and selling)
- Google Analytics — Campaign URL Builder — Builds tagged links (utm\_source, utm\_medium, utm\_campaign) so site analytics can count visits from each platform and post. Free. (Customers and selling)
- xAI documentation (Grok models, including image generation) — xAI’s official documentation for Grok, including the image generation models behind Grok Imagine. Free. (Customers and selling)
- Canva — Free design tool for social cards, carousels (LinkedIn document posts) and thumbnails with exact text. Free tier. (Customers and selling)
- Austin Kleon — Show Your Work! — A short book on sharing your process in public so people find you: building in public, without bragging. Paid. (Customers and selling)
- Amazon — Seller registration guide — Prepare for the third-party Seller Central route and account verification. (Customers and selling)
- Amazon — Selling fees and calculator — Model selling-plan, referral and fulfillment costs for the actual product. (Customers and selling)
- Walmart — Apply to be a supplier — Start the wholesale supplier route and check the requested company/product package. (Customers and selling)
- Walmart — Supplier requirements — Check current supplier, product, insurance and operating requirements. (Customers and selling)
- Walmart — Supplier checklist — Official checklist to compare against the proposed supplier packet. (Customers and selling)
- Walmart — Marketplace qualifications — Check eligibility for third-party online selling. (Customers and selling)
- Walmart — Marketplace registration and payments — Prepare business verification and consider new-seller payment holds. (Customers and selling)
- Walmart — Supplier opportunities and Open Call — Look for current supplier opportunities, including eligible U.S.-made, grown or assembled products. (Customers and selling)
- Lowe’s — Branded and private-brand supplier routes — Official routing: RangeMe for branded retail proposals; PROVIS for private-brand sourcing. (Customers and selling)
- Lowe’s — Marketplace application and FAQs — Separate curated third-party marketplace route for suitable home-improvement products. (Customers and selling)
- Lowe’s — Marketplace seller documentation — Starting point for operational seller documentation. (Customers and selling)
- GS1 US — Product identifiers and barcodes — Understand GTIN/UPC, product and packaging identifiers for retail data. (Customers and selling)
- Trade.gov — Evaluating representatives — Due-diligence questions about experience, competing lines, service and references. (Customers and selling)
- Your Europe — CE marking — Official EU starting point: which products need CE marking and the steps to apply it. (Customers and selling)
- California Proposition 65 — For businesses — Warning-label rules for products sold to California that contain listed chemicals. (Customers and selling)
Funding
- Angel Capital Association — Member directory — Find angel groups and investment platforms, then visit each group's own site to check geography, industry and application process. (Funding)
- SBIR / STTR — Federal research funding — Starting point for participating agencies and research-funding opportunities. (Funding)
- Grants.gov — Search federal funding opportunities — Search the official federal grant opportunity directory by eligibility and subject. (Funding)
- Golden Seeds — Women-led company funding — An angel network to investigate for U.S.-domiciled, early-stage companies in technology, healthcare and consumer sectors with a woman in an operating C-suite role. (Funding)
- TCA Venture Group — Funding applications — Explore seed and early growth funding across technology-related sectors in the U.S. and Canada, with a strong Southern California focus. (Funding)
- Band of Angels — Seed investment — A California-based angel network considering U.S.-registered seed technology and life-science companies, including hardware and other technical products. (Funding)
- Kickstarter — Creator Handbook — Plan a rewards-based crowdfunding campaign: tell the story, build rewards, promote it, communicate with backers and prepare fulfillment. (Funding)
- SBA — Lender Match preparation — Prepare a plan, funding purpose and evidence for a lender conversation. (Funding)
- SEC — Ready to raise capital — Assess financial, ownership, team and investor-readiness questions. (Funding)
- SEC — Early-stage investors — Understand early investor types and capital-raising considerations. (Funding)
- SBA — Grants and limited funding opportunities — Find the scope of SBA-related grant assistance and research-program starting points. (Funding)
- Sequoia — Writing a business plan — An investor’s presentation outline for problem, solution, market, model and team. (Funding)
- SEC — Regulation Crowdfunding — Rules for selling securities to the public through a registered crowdfunding platform; the page gives a maximum of $5 million in 12 months (amended 2020). Disclosure and filing duties apply. Free. (Funding)
- NIH/NIMH — SBIR eligibility criteria — SBIR eligibility: for-profit small business of 500 or fewer employees including affiliates, majority owned by US citizens or permanent residents (investor ownership rules differ by agency), principal investigator employed by the company. Award sizes vary by agency solicitation. (Funding)
- SBA — Microloans — Small loans through nonprofit intermediaries for starting or growing a small business, often with training attached. Free to read. (Funding)
- SBA — 7(a) loans — SBA’s main loan program, made by banks with an SBA guarantee: working capital, equipment, real estate. Free to read. (Funding)
- SBA — 504 loans — Long-term fixed-rate loans for major equipment and buildings, through Certified Development Companies. Free to read. (Funding)
- Treasury — State Small Business Credit Initiative (SSBCI) — Federal money given to states for small business loan, guarantee and investment programs; each state runs its own (in Wisconsin, through WEDC). Free. (Funding)
- CDFI Fund — Community Development Financial Institutions — Mission lenders (community loan funds, some credit unions and banks) that lend to small businesses banks often turn down. Free. (Funding)
- Kiva US — crowdfunded 0% small business loans — Small 0%-interest loans to US small businesses, funded by many individual lenders; social underwriting instead of credit scores. (Funding)
- IRS — Research credit against payroll tax for small businesses — A young company with qualifying research (product and process development often qualifies) can apply up to $500,000 a year of its research credit against payroll taxes, even with no income tax to offset (Forms 6765 and 8974). Free. (Funding)
- NSF — America’s Seed Fund (SBIR/STTR) — NSF’s SBIR/STTR program for technology startups, open to many topics, starting with a short Project Pitch. Free. (Funding)
- DoD SBIR/STTR (DSIP) — Where Defense Department SBIR/STTR topics are posted and proposals submitted (Army, Navy, Air Force and others). Free. (Funding)
- AFWERX — Air Force SBIR/STTR and innovation — The Air Force’s innovation arm, running a large share of its SBIR/STTR awards, including open topics. Free. (Funding)
- USDA Rural Development — business programs — Loans, guarantees and grants for businesses in rural areas, including energy programs. Free. (Funding)
- Regional: Wisconsin Center for Technology Commercialization (CTC) — Free one-on-one help for Wisconsin technology startups with SBIR/STTR proposals and commercialization; micro-grants toward proposal and plan consultants; works with WEDC on SBIR Advance. (Funding)
- Regional: Wisconsin Technology Council and Wisconsin Angel Network — Wisconsin’s tech and investor network: angel groups, the Wisconsin Entrepreneurs’ Conference and Early Stage Symposium, and investor introductions. (Funding)
- SBA — Veteran-owned businesses — SBA programs for veteran entrepreneurs: Boots to Business training, Veterans Business Outreach Centers, lending and contracting help. Free. (Funding)
- SBA — State Trade Expansion Program (STEP) — Federal money given to states to help small businesses export: trade shows, missions, website translation; run by each state (in Wisconsin, WEDC). Free. (Funding)
- FTC — Government grant scams — Why “free government grants to start your business” offers are usually scams: federal grants rarely fund starting a business, and real ones never charge a fee. Free. (Funding)
Check sheets
- New product development: the project review — Start after hearing the idea; revisit before major spending, tooling, funding or launch. (Check sheets)
- Sales, price and the money left per unit — Before choosing a price, requesting production quotes or committing to a sales channel. (Check sheets)
- People, use and ergonomic design — While comparing concepts and again with representative prototypes. (Check sheets)
- What to protect, and why — Before public disclosure, a supplier disclosure, investor sharing or a protection decision. (Check sheets)
- Design for manufacture and assembly — Before prototype quotes, tooling release and any production design change. (Check sheets)
- What the prototype needs to prove — Before each prototype build and before reporting a result. (Check sheets)
- Suppliers and production readiness — Before comparing quotes, placing production orders or scaling. (Check sheets)
- Prepare for funding and finance conversations — When a defined milestone needs outside money; tailor to the actual lender, investor or program. (Check sheets)
- Customer evidence, marketing and launch — While testing demand and before a campaign or launch commitment. (Check sheets)
- Amazon, Walmart and Lowe’s: getting ready for buyers — After choosing a realistic channel and before applying, pitching or accepting terms. (Check sheets)
Product, startup and project planning
- USPTO — Inventor and entrepreneur resources — A broad starting map for IP types, searches, training and inventor assistance. (Product, startup and project planning)
- FTC — Invention marketing scams — Questions to ask before paying an invention promotion company. (Product, startup and project planning)
- WIPO — Intellectual property for business — Connect invention protection with business strategy and commercialization. (Product, startup and project planning)
- WIPO — IP strategy checklist for SMEs — An explicit checklist from idea generation through market entry. (Product, startup and project planning)
- WIPO — IP Diagnostics — An interactive questionnaire that identifies possible business IP assets. (Product, startup and project planning)
- USPTO — Inventors Assistance Center and filing checklists — Procedural filing help, utility-application checklist, filing guides and common-mistake resources. (Product, startup and project planning)
- USPTO — Invention promotion scam prevention — Official questions and complaint resources for assessing invention promotion services. (Product, startup and project planning)
- United Inventors Association — Education and inventor community — A national nonprofit starting point for inventor education, community and commercialization resources. (Product, startup and project planning)
- Google Patents — Patent and prior-art searching — Search patent publications and related prior-art material across jurisdictions. (Product, startup and project planning)
- EPO — Espacenet patent search and guidance — Official EPO route to international patent publications, search guidance and translations. (Product, startup and project planning)
- SCORE — Startup Roadmap — A staged startup course with concrete tasks and mentor discussion points. (Product, startup and project planning)
- Y Combinator — Startup School — Founder education on ideas, customer needs, early products and growth. (Product, startup and project planning)
- NSF — I-Corps customer discovery — Research commercialization through direct customer discovery. (Product, startup and project planning)
- Strategyzer — Business and innovation tools — A library of tools for business models, customer value and experiments. (Product, startup and project planning)
- Strategyzer — Business Model Canvas — A one-page view of customers, delivery, resources, costs and revenues. (Product, startup and project planning)
- Strategyzer — Value Proposition Canvas — A worksheet to compare customer needs with the proposed offer. (Product, startup and project planning)
- Strategyzer — Test Card — A compact way to plan a business-assumption experiment. (Product, startup and project planning)
- SCORE — Business planning and financial templates — A collection of business-plan, startup-expense and financial-statement templates. (Product, startup and project planning)
- SCORE — Business checklists — A searchable collection of business, operations and marketing checklists. (Product, startup and project planning)
- SCORE — Financial Projections Template — A downloadable workbook covering startup expenses, forecasts, cash flow and break-even. (Product, startup and project planning)
- SCORE — Startup budget and projections — Guidance for startup spending, revenue assumptions and financial stress tests. (Product, startup and project planning)
- SBA — Manage your business — An operating-business roadmap for finances, employees, taxes, compliance and selling. (Product, startup and project planning)
- BDC — Start a business toolkit — A broad entrepreneur toolkit with business-planning materials. (Product, startup and project planning)
- Regional: Wisconsin SBDC — Business consulting and education — Wisconsin business feasibility, planning, finance and education through a statewide university-based network. (Product, startup and project planning)
- Regional: WEDC — Wisconsin business development programs — Wisconsin economic-development starting point for business programs and resources. (Product, startup and project planning)
- Regional: WMEP — Wisconsin Manufacturing Solutions — Wisconsin manufacturing improvement and consulting; a local complement to the existing national NIST MEP directory. (Product, startup and project planning)
- Customer discovery interviews: asking about past behavior (the Mom Test approach) — Ask about specific past events, not hypotheticals ("Would you use...?" is worthless); listen far more than talk; about 10-20 interviews per customer segment as a common guide. Vendor blog summarizing Rob Fitzpatrick's The Mom Test; the book is the original. (Product, startup and project planning)
- PDMA — Product development knowledge and community — An established professional association focused on new product development. (Product, startup and project planning)
- Stage-Gate — Discovery-to-launch process — A framework for organizing new products into stages and review decisions. (Product, startup and project planning)
- Design Council — Double Diamond — A simple discover, define, develop and deliver framework. (Product, startup and project planning)
- Atlassian — Product requirements template — A starting structure for scope, requirements and product decisions. (Product, startup and project planning)
- Atlassian — Product roadmap template — A high-level product direction and priorities worksheet. (Product, startup and project planning)
- Smartsheet — Product requirements document templates — A collection of editable product-requirements layouts. (Product, startup and project planning)
- Smartsheet — Product roadmap templates — A collection of product roadmap formats. (Product, startup and project planning)
- A.N. Creation — Product development: the process behind the conversation — Connect customer needs, requirements, design risks, prototypes, verification/validation and production controls. Your Project Manager Bot keeps the framework in mind and explains the formal approach when asked. (Product, startup and project planning)
- Atlassian — Product launch checklist — Launch preparation from market research and goals through customer feedback. (Product, startup and project planning)
- Product School — Launch readiness checklists and template — Separate readiness checks for the product, operations, sales/support, launch and post-launch review. (Product, startup and project planning)
- CPSC — Manufacturing best practices — Consumer-product safety planning covering hazards, design, suppliers, manufacturing, records and recalls. (Product, startup and project planning)
- CPSC — Regulatory Robot — An official question-driven starting point for likely consumer-product safety requirements. (Product, startup and project planning)
- A.N. Creation — Design principles: people, form and use — Practical review of usefulness, clarity, interaction, inclusive use, ergonomics, durability and lifecycle; includes a 16-area editable worksheet. (Product, startup and project planning)
- Vitsœ — Dieter Rams: good design — Consider usefulness, clarity, restraint, honest presentation, enduring quality and environmental consequences. (Product, startup and project planning)
- Don Norman — Interaction, signifiers and feedback — Distinguish possible actions from cues that communicate them; review feedback and the user's mental model. (Product, startup and project planning)
- IDSA — What is industrial design? — Understand the connection between appearance, function, manufacturability and the user's overall experience. (Product, startup and project planning)
- NC State — Principles of Universal Design — Review access, flexibility, clarity, perceivable information, error tolerance, effort and space for use. (Product, startup and project planning)
- Ellen MacArthur Foundation — Circular Design Guide — Explore useful life, repair, reuse and material recovery when comparing design directions. (Product, startup and project planning)
- IDEO.org — Design Kit — Use human-centered research, concept development and prototyping methods to learn from people. (Product, startup and project planning)
- PMI — Project management templates and tools — A professional source of project-management tools, guides and templates. (Product, startup and project planning)
- Atlassian — Project management template library — Broad starting points for project goals, risks, budgets, decisions and team coordination. (Product, startup and project planning)
- Atlassian — Project plan template — A plan layout for objectives, scope, owners, milestones and reference links. (Product, startup and project planning)
- Atlassian — DACI decision record — A record of options, decision responsibility, status and outcome. (Product, startup and project planning)
- Atlassian — Retrospective template — A way to review what worked and what should change after a milestone. (Product, startup and project planning)
- Asana — Risk register template — A risk-log structure for concerns, likelihood, consequences and response owners. (Product, startup and project planning)
- Asana — Project charter template — A compact starting definition of project purpose, scope and responsibilities. (Product, startup and project planning)
- A.N. Creation — Product and business planning review — Twelve practical questions connecting the product, startup, business and project reviews. (Product, startup and project planning)
About these recommendations
Source descriptions checked against agency, publisher, program, firm or supplier information. Named firms, suppliers and investor networks are research starting points, not endorsements or independently qualified providers. Check fit and current terms before use.
The named patent-firm and angel-network candidates are now included above. Directories, public services, commercial suppliers and learning resources are labeled separately. An official listing or a provider’s claims do not replace project-specific checks.
Companion write-ups of the tools themselves are in the hotbotspot tool library.
Everything here is a starting point. Work with artificial intelligence always needs tuning, so test it and dial it in for your own work, data and model before you rely on it.