Resources

Electrical and enclosures

UL, IEC, EN, and NFPA starting points, with a short comparison of IP56, IP57, and IP67.

71 starting points on this shelf. All shelves · Full list for assistants · Structured list

Full IP rating guide · IP guide for assistants

Electrical standards

UL standards address product safety. IEC publishes international electrical standards. EN identifies European standards; CENELEC handles electrotechnical standardization. IEC and EN are not military standards, although a military contract can call for them. Choose by product, use, and target market.

Source directory · www.shopulstandards.com

UL Standards & Engagement — Electrical standards

Find UL standards for the product: UL 508A for industrial control panels; UL 50 and UL 50E for electrical enclosures; UL 62368-1 for audio/video and information/communication technology equipment.

What to check: Confirm product scope, market, edition, and certification route. A compliant component or enclosure does not certify the whole product.

UL industrial control panels · UL enclosure evaluation

For engineering, prototype, manufacturing roles · Source: Publisher or directory operator

Source directory · webstore.iec.ch

IEC — Electrical product standards

International standards: IEC 60204-1 for machinery electrical equipment; IEC 61010-1 for measurement, control and laboratory equipment; IEC 62368-1 for AV/ICT equipment; IEC 60335-1 for household appliances; IEC 60601-1 for medical electrical equipment.

What to check: Choose the relevant family, particular parts, amendments and national adoption. These are starting points, not a checklist that applies to every product.

IEC 60204-1 · IEC 61010-1 · IEC 60335-1 · IEC 60601-1 · IEC 62368-1 background from UL

For engineering, prototype, manufacturing roles · Source: Publisher or directory operator

Source directory · www.cencenelec.eu

CENELEC — European electrical standards (EN)

Starting point for European electrotechnical standards. EN identifies a European standard; EN IEC indicates a European adoption of an IEC standard.

What to check: Confirm the actual European/national edition and any deviations for the target market. IEC and EN are not military standards. A military contract may reference them.

For engineering, prototype, manufacturing roles · Source: Publisher or directory operator

Source directory · webstore.iec.ch

IEC 60529 — Enclosure protection (IP Code)

Publisher’s source for protection against access to hazardous parts, solid objects, dust and harmful water ingress.

What to check: Use the full applicable standard and actual product test evidence for a rating claim. Read the IP quick guide for orientation; distinguish dust protection, jets and immersion.

For engineering, prototype, manufacturing roles · Source: Publisher or directory operator

Source directory · www.nfpa.org

NFPA 70 — National Electrical Code (NEC)

Reference for electrical installations in the United States.

What to check: Check the edition adopted at the installation location and applicable local requirements. Installation rules are distinct from product certification.

For engineering, manufacturing roles · Source: Publisher or directory operator

Source directory · www.nfpa.org

NFPA 79 — Electrical Standard for Industrial Machinery

Starting point for electrical equipment of industrial machines.

What to check: Confirm machine scope and the required edition; coordinate with the applicable installation and product standards.

For engineering, manufacturing roles · Source: Publisher or directory operator

Source directory · webstore.ansi.org

NEMA enclosure Types — ANSI catalog

Catalog entry for ANSI/NEMA 250 enclosure Type requirements, commonly encountered alongside UL 50E.

What to check: This linked 2020 edition is labeled historical by ANSI. Check current replacement/status and the project-required edition before use. Do not convert an IP code directly into a NEMA Type or a certification claim.

For engineering, prototype, manufacturing roles · Source: ANSI catalog; NEMA is the content provider

Primary guidance · www.osha.gov

OSHA — Nationally Recognized Testing Laboratories

Understand applicable U.S. workplace product certification and recognized laboratory scope.

What to check: Applies to specified products and circumstances; not a statement that every consumer electrical product must carry UL certification.

For project, engineering, prototype, manufacturing roles · Source: Primary publisher; public guidance or catalog scope reviewed

Primary guidance · www.ecfr.gov

eCFR — 47 CFR 15.31 measurement standards

Review applicable radio/emissions measurement procedures and representative operating configurations.

What to check: Government-maintained eCFR is authoritative but unofficial. Confirm applicability, current rules and incorporated methods with the lab; do not generalize settings to every product.

For project, engineering, prototype, manufacturing roles · Source: Primary publisher; public guidance or catalog scope reviewed

Primary guidance · www.ecfr.gov

eCFR — 47 CFR 15.212 modular transmitters

Investigate module integration, antennas and RF exposure in the final configuration.

What to check: Module approval has conditions and does not automatically cover every host arrangement; confirm the finished-product route and any further testing.

For project, engineering, prototype, manufacturing roles · Source: Primary publisher; public guidance or catalog scope reviewed

Primary guidance · webstore.iec.ch

IEC 61000-4-2:2025 — ESD immunity test method

Public scope shows what an ESD immunity method addresses and why product-specific requirements matter.

What to check: Public catalog only; full paid procedure was not reviewed. The generic method does not select every product’s required severity, and publication does not imply adoption in every market.

For project, engineering, prototype, manufacturing roles · Source: Primary publisher; public guidance or catalog scope reviewed

Primary guidance · www.tek.com

Tektronix — EMI precompliance during development

Understand the role of early prototype screening in finding interference problems before formal testing.

What to check: Instrument-maker guidance, not a regulatory method or authorization. No unsafe bench procedure is reproduced.

For project, engineering, prototype, manufacturing roles · Source: Primary publisher; public guidance or catalog scope reviewed

Primary guidance · www.tuvsud.com

TÜV SÜD — EMC test planning and laboratory preparation

An automotive example of documenting modes, monitoring, variants, support equipment and acceptance.

What to check: Public 2024 paper; adapt planning fields only. Automotive test requirements and sample counts are not universal consumer-product requirements.

For project, engineering, prototype, manufacturing roles · Source: Primary publisher; public guidance or catalog scope reviewed

Government source · www.fcc.gov

FCC — Equipment authorization

Plain starting point for selling anything with radio or fast digital electronics in the U.S.: which approval path, labs and FCC ID search.

What to check: Find the approval procedure for the device type. Look up the FCC ID of any radio module used. Pair with the eCFR part 15 entries.

For engineering role · Source: Government agency’s own website

Government source · environment.ec.europa.eu

European Commission — RoHS Directive

EU limits on lead, mercury, cadmium and other restricted substances in electrical and electronic equipment.

What to check: Get supplier declarations for each electronic part before the first production run. Check the current exemptions list.

For engineering, manufacturing roles · Source: Government agency's own website

Primary guidance · www.shopulstandards.com

UL 508A — industrial control panels

Industrial control panels for general industrial use up to 1000 V: assemblies of power and control components, wiring, terminals and enclosures, for ordinary locations installed per the NEC. Does not evaluate the loads or whether the controls supervise the whole machine. Free Digital View; copies paid.

Edition: Edition 3, revision 2025-06-26 (ANSI approved same day)

What to check: Confirm the current edition on the publisher's page before relying on it; a catalog page is not the full standard.

For engineering, prototype roles · Source: Publisher page, summarized by a computer-intelligence research tool and not yet opened directly

Primary guidance · www.nfpa.org

NFPA 70E — electrical safety in the workplace

Safe electrical work practices: protection from shock, electrocution, arc flash and arc blast; helps meet OSHA electrical safety rules. A workplace standard, not a product standard. Free to view with an account (no download).

Edition: 2027 edition, current per NFPA; publication date not stated

What to check: Confirm the current edition on the publisher's page before relying on it; a catalog page is not the full standard.

For engineering, prototype roles · Source: Publisher page, summarized by a computer-intelligence research tool and not yet opened directly

Primary guidance · webstore.iec.ch

IEC 61131-3 — PLC programming languages

PLC programming languages: syntax and meaning of structured text, ladder, function block diagram; sequential function chart elements; configuration elements and communication features. Paid (CHF 475).

Edition: IEC 61131-3:2025, edition 4.0, 2025-05-22

What to check: Confirm the current edition on the publisher's page before relying on it; a catalog page is not the full standard.

For engineering, prototype roles · Source: Publisher page, summarized by a computer-intelligence research tool and not yet opened directly

Primary guidance · Standards publisher

ISO 13849-1 — safety-related parts of control systems

Method and requirements for designing safety-related parts of machine control systems (software included), any technology, high-demand or continuous use. Does not choose the safety functions or required performance levels for a given machine. Paid.

Edition: ISO 13849-1:2023, edition 4, 2023-04

What to check: Confirm the current edition on the publisher's page before relying on it; a catalog page is not the full standard.

For engineering, prototype roles · Source: Publisher page, summarized by a computer-intelligence research tool and not yet opened directly

Primary guidance · www.shopulstandards.com

UL 2054 — household and commercial batteries

Portable primary and rechargeable batteries (single cells and packs) as product power sources: reduce fire, explosion and injury in use and when removed for transport, storage or disposal. Does not cover the battery in its host product; the product needs its own standard. Free Digital View; PDF paid.

Edition: Edition 3, published 2021-11-17, last revision 2022-03-10

What to check: Confirm the current edition on the publisher's page before relying on it; a catalog page is not the full standard.

For engineering, prototype roles · Source: Publisher page, summarized by a computer-intelligence research tool and not yet opened directly

Primary guidance · webstore.iec.ch

IEC 62133-2 — lithium cells and batteries, portable applications

Safety requirements and tests for portable sealed rechargeable lithium cells and batteries, for intended use and foreseeable misuse; includes coin cells, assembly of cells into batteries, vibration and shock. Paid.

Edition: IEC 62133-2:2017+AMD1:2021 CSV, edition 1.1, published 2021-07-15

What to check: Confirm the current edition on the publisher's page before relying on it; a catalog page is not the full standard.

For engineering, prototype roles · Source: Publisher page, summarized by a computer-intelligence research tool and not yet opened directly

Primary guidance · www.shopulstandards.com

UL 1642 — lithium cells

Lithium cells and multicell batteries, primary and rechargeable, technician- or user-replaceable: reduce fire, explosion and injury; host product must meet its own standard. 2022 revision: round-bar crush replaces impact for pouch cells. Free Digital View; PDF paid.

Edition: Edition 6, published 2020-09-29, last revision 2022-10-12 (a 2025-09-25 certification decision is not a new edition)

What to check: Confirm the current edition on the publisher's page before relying on it; a catalog page is not the full standard.

For engineering, prototype roles · Source: Publisher page, summarized by a computer-intelligence research tool and not yet opened directly

Government source · unece.org

UN Manual of Tests and Criteria, section 38.3 — lithium battery transport tests

Section 38.3: the transport tests every lithium cell and battery type must pass before it can ship under the transport rules. Amendment 1 changes 38.3 and the definition of rupture. Supplements, does not replace, the transport regulations. Free to read online.

Edition: Manual of Tests and Criteria, Rev. 8 (2023) with Amendment 1 (2025; files from Sept 2025)

What to check: Confirm the current edition on the publisher's page before relying on it; a catalog page is not the full standard.

For engineering, prototype roles · Source: Publisher page, summarized by a computer-intelligence research tool and not yet opened directly

Primary guidance · www.iata.org

Lithium battery shipping guidance

Air shipping of lithium metal, lithium-ion and sodium-ion batteries: classification, UN 38.3 test summary, packaging, marks, labels, documents, training, state-of-charge limits; separate rules for batteries alone, packed with equipment, and in equipment. Guidance only, not a compliance source. Free.

Edition: Battery Guidance Document dated 2026-01-01, based on IATA DGR 67th edition (2026) and ICAO TI 2025-2026

What to check: Confirm the current edition on the publisher's page before relying on it; a catalog page is not the full standard.

For engineering, prototype roles · Source: Publisher page, summarized by a computer-intelligence research tool and not yet opened directly

Government source · www.ecfr.gov

49 CFR 173.185 — lithium cells and batteries in transport

US transport rules for lithium cells and batteries, alone, packed with or in equipment: tested types, test records and summaries, protection and packaging against short circuit and damage; exceptions for small batteries, prototypes and low production runs, recycling, damaged batteries. Free.

Edition: eCFR current to 2026-10-08; section last amended 2024-04-10 (89 FR 25478)

What to check: Confirm the current edition on the publisher's page before relying on it; a catalog page is not the full standard.

For engineering, prototype roles · Source: Publisher page, summarized by a computer-intelligence research tool and not yet opened directly

Government source · www.ecfr.gov

47 CFR Part 15 — radio frequency devices

Radio frequency devices: unintentional radiators (most electronics) and intentional transmitters. Equipment authorization, conducted and radiated emission limits, measurement, labels, user information; which rules apply depends on device type and frequency. Free.

Edition: eCFR, current to 2026-10-08 (title-wide dates)

What to check: Confirm the current edition on the publisher's page before relying on it; a catalog page is not the full standard.

For engineering, prototype roles · Source: Publisher page, summarized by a computer-intelligence research tool and not yet opened directly

Government source · www.ecfr.gov

47 CFR Part 18 — industrial, scientific and medical equipment (includes induction heating)

Industrial, scientific and medical (ISM) RF equipment, induction heating included: good engineering practice, shielding and filtering to control emissions; the operator must fix harmful interference. Free.

Edition: eCFR, current to 2026-10-08 (title-wide dates)

What to check: Low confidence: page mostly navigation; full text not read. Confirm the current edition on the publisher's page before relying on it; a catalog page is not the full standard.

For engineering, prototype roles · Source: Publisher page, summarized by a computer-intelligence research tool and not yet opened directly

Government source · www.fcc.gov

KDB 680106 — wireless power transfer devices

FCC guidance on equipment authorization and RF exposure for wireless power transfer. Third-party sources report a section 5.2 exclusion (under 1 MHz, 15 W or less per transmitting element); outside it, an FCC inquiry (KDB) is needed. Unconfirmed: read on apps.fcc.gov before relying on it.

Edition: Perplexity: not found. Office search: v04, 2023-10-24 (FCC TCB workshop deck), possibly a 01/2024 revision; not confirmed on apps.fcc.gov

What to check: Low confidence: KDB record itself not read. Confirm the current edition on the publisher's page before relying on it; a catalog page is not the full standard.

For engineering, prototype roles · Source: Publisher page, summarized by a computer-intelligence research tool and not yet opened directly

Primary guidance · webstore.iec.ch

CISPR 32 / CISPR 35 — emissions and immunity of multimedia equipment

Multimedia equipment up to 600 V: CISPR 32 sets Class A/B emission limits and measurement; CISPR 35 sets immunity requirements and tests. Paid.

Edition: CISPR 32:2015+AMD1:2019 CSV, ed. 2.1, 2019-10-01; CISPR 35:2016, ed. 1.0, 2016-08-16

What to check: Confirm the current edition on the publisher's page before relying on it; a catalog page is not the full standard.

For engineering, prototype roles · Source: Publisher page, summarized by a computer-intelligence research tool and not yet opened directly

Government source · single-market-economy.ec.europa.eu

EMC Directive 2014/30/EU

EU: apparatus must limit disturbances and be immune enough to work in its environment. Manufacturer does conformity assessment, technical file, EU declaration of conformity and CE mark. Free.

Edition: Directive 2014/30/EU (OJ L 96, 2014-03-29); consolidated 2026-05-30

What to check: Confirm the current edition on the publisher's page before relying on it; a catalog page is not the full standard.

For engineering, prototype roles · Source: Publisher page, summarized by a computer-intelligence research tool and not yet opened directly

Primary guidance · webstore.iec.ch

IEC/UL 62368-1 — audio/video and ICT equipment safety

Safety of audio/video, IT and communication equipment (and office machines up to 600 V, UL): classify energy sources and provide safeguards against pain, injury and fire. Paid; UL Digital View free when registered.

Edition: IEC 62368-1:2023 ed. 4.0 (corrected 2025-08); ANSI/UL 62368-1 4th ed. 2025-07-31 with US differences

What to check: Confirm the current edition on the publisher's page before relying on it; a catalog page is not the full standard.

For engineering, prototype roles · Source: Publisher page, summarized by a computer-intelligence research tool and not yet opened directly

Primary guidance · webstore.iec.ch

IEC/UL 60335-1 — household appliance safety

General safety of household and similar appliances, battery-operated included; always used with the matching IEC 60335-2-x part. UL changes voltage scope (250 V single-phase and battery; 600 V other). Paid; UL Digital View shows national differences only.

Edition: IEC 60335-1:2020+AMD1:2025 CSV ed. 6.1, 2025-10-31; ANSI/UL 60335-1 7th ed. 2025-12-11 (adopts IEC ed. 6.0)

What to check: Confirm the current edition on the publisher's page before relying on it; a catalog page is not the full standard.

For engineering, prototype roles · Source: Publisher page, summarized by a computer-intelligence research tool and not yet opened directly

Government source · single-market-economy.ec.europa.eu

Low Voltage Directive 2014/35/EU

EU: electrical equipment 50-1000 V AC or 75-1500 V DC must protect people, animals and property; technical file, conformity assessment, declaration, CE mark. Battery products below 75 V DC fall outside it (GPSR then applies). Free.

Edition: Directive 2014/35/EU (OJ L 96, 2014-03-29); consolidated 2026-05-30

What to check: Confirm the current edition on the publisher's page before relying on it; a catalog page is not the full standard.

For engineering, prototype roles · Source: Publisher page, summarized by a computer-intelligence research tool and not yet opened directly

Government source · single-market-economy.ec.europa.eu

General Product Safety Regulation (EU) 2023/988

EU consumer product safety where no other EU law covers the risk: only safe products; manufacturer risk analysis, technical documentation, identification and safety information, corrective action; duties for importers, distributors, EU responsible person and online marketplaces. Free.

Edition: Regulation (EU) 2023/988 (OJ L 135, 2023-05-23); consolidated 2026-05-29 (amended by 2024/2748)

What to check: Confirm the current edition on the publisher's page before relying on it; a catalog page is not the full standard.

For engineering, prototype roles · Source: Publisher page, summarized by a computer-intelligence research tool and not yet opened directly

Government source · battery.army.mil

Conformal Wearable Battery — U.S. Army battery site

Vest-worn lithium-ion battery: output about 10–20 V by version and charge, Nett Warrior connector (STANAG 4695) and bottom contacts; version 3.6.2 and later add a USB-A port. Free.

What to check: Confirm the current version and connector against the program's documents.

For engineering roles · Source: Government agency’s own website

Supplier candidate · cdn.glenair.com

Glenair Series 807 Nett Warrior connector

The 6-pin Nett Warrior connector and the 7-pin version with USB-C power; adopted as NATO STANAG 4695; STAR-PAN hubs distribute soldier power and data. Free catalog.

What to check: Catalog data, not an interface control document; confirm pinout and ratings against the program ICD.

For engineering roles · Source: Supplier’s own website

Supplier candidate · www.l3harris.com

L3Harris RF-7912 handheld power adapter

Runs AN/PRC-152A and AN/PRC-163 handheld radios from external DC and charges the radio battery; a benchmark for switch-over and charging behavior. Free spec sheet.

What to check: Spec sheet only; confirm current models and behavior with the maker.

For engineering roles · Source: Supplier’s own website

Primary guidance · www.usb.org

USB-IF specifications: USB 2.0, USB Type-C, USB Power Delivery

The USB data, connector and power specifications: legacy 5 V/500 mA, Type-C current advertisement, and Power Delivery negotiation. Free.

What to check: Confirm the current revision with the publisher (ASSIST for military documents) before relying on it; the contract's edition governs.

For engineering roles · Source: Publisher or directory operator

Primary guidance · sbs-forum.org

Smart Battery Data Specification and SMBus

How smart batteries report state of charge, temperature, voltage, current and requested charge settings over SMBus. Free.

What to check: Confirm the current revision with the publisher (ASSIST for military documents) before relying on it; the contract's edition governs.

For engineering roles · Source: Publisher or directory operator

Supplier candidate · www.parker.com

Parker Chomerics Conductive Elastomer Engineering Handbook

Conductive gasket design guide: materials and fillers, profiles, deflection ranges, compression stops, flange design, corrosion and galvanic compatibility, form-in-place gaskets. Free.

What to check: Maker’s guidance; use its data for its products and confirm with the gasket supplier.

For engineering roles · Source: Supplier’s own website

Supplier candidate · www.iristechnology.com

Iris Technology Vulture Power Scavenger

In-line soldier power scavenger: 5–46 V DC input (solar included), offsets system-battery drain and charges a CWB or 2590 as an SMBus charger; built for Nett Warrior. A benchmark for soldier power devices.

What to check: Iris documents disagree on maximum output (5 A or 10 A at 16.8 V); check the current datasheet.

For engineering roles · Source: Supplier’s own website

Supplier candidate · www.militaryaerospace.com

Iris Technology Merlin HH+ radio power and data adapter

Power and data adapter for the AN/PRC-163 that runs the radio from external power while charging its battery. A benchmark for radio charging behavior.

What to check: Trade-press description; ask the maker for specifications.

For engineering roles · Source: Publisher or directory operator

Primary guidance · webstore.iec.ch

IEC 61010-1 — safety of electrical equipment for measurement, control and lab use

Safety requirements for measuring equipment: insulation, creepage and clearance, enclosures, flammability; IEC 61010-2-030 adds measuring circuits and measurement categories (CAT II, III, IV). UL 61010-1 is the U.S. version. Paid.

What to check: Confirm the current edition with the publisher before relying on it.

For engineering roles · Source: Publisher page

Primary guidance · Standards publisher

ISO 20653 — degrees of protection (IP code) including IPX9K

Protection ratings for vehicle electrical equipment, including high-pressure, high-temperature water jets (IPX9K) used for washdown. Paid.

What to check: Confirm the current edition with the publisher before relying on it.

For engineering roles · Source: Publisher page

Supplier candidate · www.gore.com

Gore protective vents (expanded PTFE membrane vents)

Pressure-equalizing vents that let air through and keep water and dust out of sealed enclosures; ratings by immersion depth. Free product data.

What to check: Supplier data; choose a vent rated to the required immersion.

For engineering roles · Source: Supplier’s own website

Primary guidance · standards.ieee.org

IEEE 299 — measuring shielding effectiveness of enclosures

The standard method for measuring how well an enclosure shields; useful when a customer asks for shielding numbers. Paid.

What to check: Confirm the current edition with the publisher before relying on it; the contract's edition governs.

For engineering roles · Source: Publisher page

Learning resource · batteryuniversity.com

Battery University — lithium-ion charging basics

Plain-language articles on lithium-ion charging (CC/CV, termination, temperature limits), aging and safety; good for the project manager’s questions. Free.

What to check: Educational overview; the cell maker’s data sheet governs.

For engineering roles · Source: Publisher or directory operator

Supplier candidate · www.ti.com

Texas Instruments battery management application notes

Charger and fuel-gauge application notes: charge profiles, JEITA temperature control, power-path management, SMBus gauges. Free.

What to check: Maker’s guidance for its parts; principles transfer, part values don’t.

For engineering roles · Source: Supplier’s own website

Primary guidance · webstore.iec.ch

IEC 61010-2-030 — particular requirements for testing and measuring circuits

Measuring circuits and measurement categories (CAT II, III, IV) for equipment that measures mains; works with IEC 61010-1. Paid.

What to check: Confirm the current edition with the publisher before relying on it; the contract's edition governs.

For engineering roles · Source: Publisher page

Primary guidance · www.shopulstandards.com

UL 50E — enclosures for electrical equipment, environmental considerations

Environmental ratings for enclosures (the UL side of NEMA types 4, 4X, 6, 6P, 12 and others). Paid.

What to check: Confirm the current edition with the publisher before relying on it; the contract's edition governs.

For engineering roles · Source: Publisher page

Primary guidance · webstore.iec.ch

IEC 60204-1 — electrical equipment of machines

The international counterpart of NFPA 79 for machine electrical equipment; often required for export machines. Paid.

What to check: Confirm the current edition with the publisher before relying on it; the contract's edition governs.

For engineering roles · Source: Publisher page

Primary guidance · www.emva.org

EMVA 1288 — measuring and presenting machine vision camera specifications

Vendor-neutral camera data (sensitivity, noise, dark current, uniformity, defective pixels) for comparing cameras on equal terms before picking one. Free.

What to check: Confirm the current revision with the publisher (ASSIST for military documents) before relying on it; the contract's edition governs.

For engineering roles · Source: Publisher page

Learning resource · docs.kicad.org

KiCad documentation

Free, open-source schematic and board design suite: the manual for schematic, layout, rule checks, fabrication outputs, and kicad-cli for scripted checks and exports (what a bot uses). Free.

What to check: Use the manual for your KiCad version.

For engineering roles · Source: Publisher or project page

Source directory · www.snapeda.com

SnapMagic (formerly SnapEDA) — symbols, footprints and 3D models

Free symbols, footprints and 3D models for KiCad and other tools, for parts KiCad’s libraries lack.

What to check: Check every footprint against the data sheet’s land pattern and pin numbering before use.

For engineering roles · Source: Publisher or project page

Source directory · www.ultralibrarian.com

Ultra Librarian — symbols, footprints and 3D models

Free part models for KiCad and other tools, often linked from chip makers’ product pages.

What to check: Check every footprint against the data sheet’s land pattern and pin numbering before use.

For engineering roles · Source: Publisher or project page

Supplier candidate · www.analog.com

LTspice — circuit simulator

Free circuit simulator from Analog Devices, with models for many power parts; try a circuit before building it. Free.

What to check: A simulation is only as good as its models; confirm on the bench.

For engineering roles · Source: Supplier’s own website

Supplier candidate · webench.ti.com

TI Power Designer (WEBENCH)

Free online tool that designs a power supply around a TI chip: part values, efficiency, a schematic and a parts list.

What to check: Check the results against the chip’s data sheet design procedure.

For engineering roles · Source: Supplier’s own website

Learning resource · github.com

Interactive HTML BOM (KiCad plugin)

Free KiCad plugin that makes a clickable placement map from the board, for hand assembly and inspection.

What to check: Check the version that matches your software; community and vendor material, not a standard.

For engineering roles · Source: Publisher or project page

Learning resource · kibot.readthedocs.io

KiBot — automated KiCad outputs

Free tool that makes every fabrication and documentation output (Gerbers, drill, BOM, placement, PDFs, IPC-2581) from one configuration file, in one command.

What to check: Check the version that matches your software; community and vendor material, not a standard.

For engineering roles · Source: Publisher or project page

Supplier candidate · www.altium.com

Altium Designer — importing a design from KiCad

How Altium’s KiCad importer turns a KiCad project into an Altium project (File, Import Wizard); which KiCad versions it supports. For a prototype shop that works in Altium.

What to check: Confirm the KiCad versions the shop’s importer supports before sending a design.

For engineering roles · Source: Supplier’s own website

Primary guidance · www.ucamco.com

Ucamco — Gerber format specification

The free specification of the Gerber file format that board shops build from, and a free online viewer.

What to check: Shops accept RS-274X and X2; confirm what yours wants.

For engineering roles · Source: Publisher page

Primary guidance · www.ipc2581.com

IPC-2581 (IPC-DPMX) — open manufacturing data exchange format

One XML file carrying layers, drills, stack-up, netlist and parts for fabrication and assembly; KiCad exports it. Free.

What to check: Ask whether your shop accepts it; many still prefer Gerbers.

For engineering roles · Source: Publisher page

Primary guidance · www.ipc.org

IPC-2152 — current-carrying capacity of printed board traces

Trace width and copper weight for a given current and temperature rise; KiCad’s calculator applies the older IPC-2221 rule. Paid.

What to check: Confirm the current revision with IPC.

For engineering roles · Source: Publisher page

Supplier candidate · www.ti.com

TI — Layout Guidelines for Switching Power Supplies (AN-1149)

The classic free note on switching power supply layout: current loops, ground planes, component placement. Free.

What to check: Maker’s data sheet and evaluation board guide govern; confirm stock and the current revision.

For engineering roles · Source: Supplier’s own website

Supplier candidate · www.analog.com

Analog Devices AN-1119 — low-noise layout for switching regulators

Find the switching current paths first, then place parts to keep them small; avoiding noise problems by layout. Free.

What to check: Maker’s data sheet and evaluation board guide govern; confirm stock and the current revision.

For engineering roles · Source: Supplier’s own website

Learning resource · gov.wiley.com

Henry Ott — Electromagnetic Compatibility Engineering (Wiley)

The standard practical book on EMC: grounding, filtering, shielding, board layout and stack-up, with little math. Paid.

What to check: Book; principles, not limits. Limits come from the rules that apply.

For engineering roles · Source: Publisher page

Government source · www.ecfr.gov

47 CFR 15.23 — home-built devices

A device built for personal use, not sold, not from a kit, five or fewer, needs no FCC equipment authorization, but must not cause harmful interference and should meet the Part 15 limits as closely as practical. Free.

What to check: Read the current text on eCFR.

For engineering roles · Source: Government agency’s own website

Supplier candidate · www.ti.com

TI BQ25756 — buck-boost charge controller, 1 to 14 cells

Charges 1 to 14 lithium-ion cells from 4.2 to 70 V input (so a 5-cell tool pack from USB-C 20 V), standalone with resistors or over I2C, thermistor input, reverse mode that can supply USB-C power from the battery; evaluation board and USB-C application note. Free.

What to check: Maker’s data sheet and evaluation board guide govern; confirm stock and the current revision.

For engineering roles · Source: Supplier’s own website

Supplier candidate · www.st.com

ST STUSB4500 — standalone USB-C Power Delivery sink controller

Negotiates up to 20 V and 5 A (100 W) from a USB-C PD charger without a microcontroller, with settings stored in its memory. Free.

What to check: Maker’s data sheet and evaluation board guide govern; confirm stock and the current revision.

For engineering roles · Source: Supplier’s own website

Supplier candidate · www.ti.com

TI TPS25750 — USB-C Power Delivery controller with power switches

USB-C PD controller that can be configured as a sink (or source) without writing firmware; TI pairs it with its battery chargers in reference designs. Free.

What to check: Maker’s data sheet and evaluation board guide govern; confirm stock and the current revision.

For engineering roles · Source: Supplier’s own website

Supplier candidate · www.ti.com

TI BQ76920 — 3 to 5 cell battery monitor

Measures each cell of a 3 to 5 cell lithium-ion pack, with hardware over- and under-voltage protection and a thermistor input; the basis of an independent per-cell cut-off in a charger. Free.

What to check: Maker’s data sheet and evaluation board guide govern; confirm stock and the current revision.

For engineering roles · Source: Supplier’s own website

IP enclosure ratings at a glance

Read the two digits separately: the first is solid-object and dust protection; the second is water protection. Here are the three examples people often confuse.

IP56, IP57 and IP67 compared

CodeSolids / dustWater
IP565: dust-protected6: powerful water jets
IP575: dust-protected7: temporary immersion
IP676: dust-tight7: temporary immersion

Dust-protected allows limited entry; dust-tight does not. Immersion and water-jet tests are different, so IP67 alone does not establish IP66 performance.

See the basic digit tables and test limits · IP guide for bots

Everything here is a starting point. Work with artificial intelligence always needs tuning, so test it and dial it in for your own work, data and model before you rely on it.